Fitting Pioneer SPH-DA120 to 2012 Polo 6R

[Roh4nms]

Would these fit?


Sent from my iPhone using Tapatalk

[alexperkins]

Yep then add a HID kit

[alexperkins]

https://www.ebay.co.uk/itm/152300241950

[Roh4nms]

Ok awesome. Thanks for all the help! When I get around to fitting my pioneer sph-da120 I'm certain I'll run into a bunch of problems so i may have to ask a few more Qs regarding that over the weekend. Thanks for all the help!


Sent from my iPhone using Tapatalk

[Roh4nms]

Hi all,
Today I am fitting my pioneer sph-da120 and I've already hit a problem.
It was mentioned by Alex I will need to attach the red cable to a live ignition wire, the orange to an illumination cable and the Arial to an the pioneer loom... so I've attached the quad lock adapter to the original look and I don't know where to go from here... any help in locating ignition live and illumination cable would be greatly appreciated.
Thank you


Sent from my iPhone using Tapatalk

[Roh4nms]

Sent from my iPhone using Tapatalk

[alexperkins]

Aerial cable there's a terminal on the pioneer loom that says system remote which you can use

Red cable needs to go to something live with the ignition on. You can probably pillage that on the back of the heated window switch above

Same for illumination. That's the grey cable with the blue stripe on the same switch

Are you capable of tapping those wires into the car loom? You'll need a multimeter and a soldering iron or splice connectors to do it

[Roh4nms]

Aerial cable there's a terminal on the pioneer loom that says system remote which you can use

Red cable needs to go to something live with the ignition on. You can probably pillage that on the back of the heated window switch above

Same for illumination. That's the grey cable with the blue stripe on the same switch

Are you capable of tapping those wires into the car loom? You'll need a multimeter and a soldering iron or splice connectors to do it

Quite a complicated task then [emoji28]


Sent from my iPhone using Tapatalk

[Roh4nms]

Also I have noticed there are only 2 cables coming out of the adapter loom when there are 5 going in from the car... (left side of loom)



Sent from my iPhone using Tapatalk

[alexperkins]

Correct. There are additional power feeds and the CAN wires

Might be wise to call on a local garage or dare I say your nearest Halfords to help you fit it

This was part of the reason why I suggested the more expensive adapter as it doesn't need any tapping in

[Roh4nms]

Ok thanks for the help I'm going to get some help from my girlfriend's dad who is an auto electrician so fingers crossed he'll be able to give me hand..
thanks for all the help Alex much appreciated


Sent from my iPhone using Tapatalk

[alexperkins]

Sorted then

Use the heated mirror switch for the feeds and you'll be away

[Roh4nms]

Quick update. Had it fitted last week and love it! Car play works a treat.


Splash screen


Apple Car Play


Home screen


Sent from my iPhone using Tapatalk

[alexperkins]

Excellent thanks for updating us