Surely. Your 6R has folding mirrors (WRMs) from the factory (WRMs without automatic function). While the installation with the module K418 and 5 pin relay is for Polo 6R Europe with WRMs without function for folding mirrors.patil wrote: ↑Fri Jun 30, 2017 2:55 pm Hello Master need your help again
I am trying to complete the installation of autofolding mirrors with module K418 and 5 pin relay.
I did the wiring exactly same as you did previously. After completing installation, only Rt side mirror folds and unfolds with remote.
I checked the wiring two three times and everything seems to be correct. Am I missing something???
Will the wiring be different on my RHD 6r? Your suggestions will be able to help me
On another note, I installed OEM passenger side central door lock switch and it works perfectly Thanks a lot Master
I would never have done this electrical installation on your 6R IND with electrical installation for folding mirrors from factory. I would have searched for the right WRMs.
The WRMs software should be like mine or higher:
Subsystem 2 - Part No SW: 6R0 959 801 BD HW: 6R0 959 801 BD Labels: 6R0-959-801.CLB
Component: J386__TSG_FT 003 8612
Serial number: KU0KU003041440937042
Coding: 0200A3
Subsystem 3 - Part No SW: 6R0 959 802 BF HW: 6R0 959 802 BF Labels: 6R0-959-802.CLB
Component: J387__TSG_BT 003 8612
Serial number: KU0KU006031440656541
Coding: 1000AB
Remember, this WRMs references/part numbers are for LHD. Your 6R is RHD.
When I did the NO OEM installation there were no WRMs with automatic function for LHD, as soon as it was possible (my WRMs coming from the firsts Polo 6C manufactured) I did the OEM electrical installation.
OEM
NO OEM
---------
Meanwhile, separate theme:
Waiting to receive the new TPMS module to test, or also I waiting for a zdc file for the current TPMS module. (direct TPMS)