Hi,
I'm looking at putting a tailpipe on my 2012 1.2 polo s (not worth spending £100s on full exhaust system since it's only got a crappy little engine)
Basically my dilemma is that the standard rear bumper has no exhaust cut out and the exhaust is bent towards the ground behind it... is there anyway you can fit a tail pipe to it? If so can you advise on how this is achieved and also recommend a brand.
Thanks,
Rohan
Sent from my iPhone using Tapatalk
Tail pipe for 1.2 polo s
-
gaza1994
- Bronze Member
- Posts: 150
- Joined: Thu Mar 16, 2017 1:39 pm
- Drives: Match 1.4 2012 (6r) (85ps)
- Location: Scottish Borders
- Contact:
Re: Tail pipe for 1.2 polo s
most aftermarket exhausts (or backboxes) will be a straight pipe, so you'd probably need to cut out the bumper.
Unless you take it to one of these places that cant make you a backbox, they might be able to do it, but not sure as i've never had one made!
Unless you take it to one of these places that cant make you a backbox, they might be able to do it, but not sure as i've never had one made!
-
Roh4nms
- New
- Posts: 47
- Joined: Tue May 09, 2017 3:09 pm
- Drives: 2012 Volkswagen Polo 1.2 6R
- Location: Easy-Sussex
Re: Tail pipe for 1.2 polo s
Does anyone know if this will fit my polo? I only have the standard model.
If so it'll allow me to put a straight tailpipe on.
Also any idea on how much it'll cost to have it sprayed white?
Thanks
Sent from my iPhone using Tapatalk