Problems with ECU after BCM upgrading

[blue_ming]

hi everyone,
i want to ask a question about the ECU problems after 7H0937090D upgrading on my Fabia MKII from Chinese Market.
after this upgrading, both vcds and 5054A can not access 01-ECU, both return "no response" when try to access ECU. Does anybody could give some suggestions, if he/she has same or similar situation?

many thanks.

[ciclo]

Hello

Is address 01 enabled in the gateway installation list?
Have you installed new CAN lines for the Instrument Cluster when you installed that new BCM (Max)?

Please, post a recent full autoscan. Thanks.

[blue_ming]

Hello

Is address 01 enabled in the gateway installation list?
Have you installed new CAN lines for the Instrument Cluster when you installed that new BCM (Max)?

Please, post a recent full autoscan. Thanks.

hi
thanks for your reply.
01-ecu is enabled in the gateway list, and cluster can lines were installed according the diagrams.

i'll post my scan this weekend as i need to find englisht version of vcds.
Thanks.

[ciclo]

No problem for me, you can post the autoscan in your language.


edit:
Please, for VCDS, read the part of this post that may interest you. HERE
Maybe you can reach the ECU in this way.