Thanks for accepting me into this forum, I am from South Africa.
I took delivery of my new Polo a few days ago, it is a Polo with a non-turbo 1.6 MPi petrol engine. (I prefer naturally aspirated petrol engine for long term reliability.)
My car is assembled on the 24-AUG-2019 in the South Africa Production Line.
And it seems like the production line in South Africa is rushing to assemble these cars and didn't do their QC properly, as soon as I took delivery of the car I already spotted the following problems:
1) Interior trim above to the rear view mirror is not clipped in properly.
2) Left rear door's waterproof rubber tube of the electrical cable is not clipped into place.
3) A piece of metal clip is left inside the tailgate, so whenever the car is cornering there is a marble rolling sound from the tailgate.
4) The air ventilation is working in reverse.
5) The aircon is not cooling, compressor didn't click in due to there is not enough gas filled into the aircon system.
Although all the problems are fixed now (My car was in the dealership's workshop for 3 times...@@", and I believe the dealer suppose to at least picked up problem (4) and (5) in PDI.)
Just a piece of advice to those who will be taking delivery of your new Polo that is also produced around August 2019, please check all the functions (Light, Aircon, Ventilation...etc.) before leaving the showroom with your new car.
I already contacted VWSA about these issues, their customer care department is helpful and promise to past the message to the factory.
But times will tell if they will actually improve their QC as more people take delivery of their new Polo.
we don't have these in europe 
Although VWSA should have put in the 1,8 82kW engine from the CTi 
