But anyways the work is all done, just the paintwork needs to be polished etc etc and just cleaned.
Anyways straight to the point.....here are some before and after pics of my car....one thing 100mm peice of p***. Can even go lower, But lets be sensible now
BEFORE
---------------------------------------------------------------------------------
AFTER
Mods Shown on pic below include smoothed front indicators, extended standard bonnet, golf mk2 smoked indicators places in lower part of 8V Front Bumper, shortened lower centre plastic grill, smoothed number plate recess, colour coded and de texturised splitter, vented wing, smaller number plate and universal attachment.
Mod Shown on pic below include relocated reg plate light
Mod Shown on pic below include smoothed out tramlines found under rear taillights
Mod Shown on pic below include smoothed standard side sills, jacking points and join removed
Mod Shown on pic below include smoothed out ariel and internal one relocated behind front rear view mirror
Mod Shown on pic below include 16V rear with toebar eye smoothed out...8V colour coded front splitter was not smoothed into the rear 16V as came down far too low, anyone is free to pinch that idea now [:0]
Arches rolled and slightly flaired enough for wheels to go into arches without rubbing...see earlier pic. 5mm spacers needed for front until that can come down lower due to the fact that coilover is very close to the tyre atm.
What you alls think?
Thanks for waiting for pics to load,
Ross
lookin good. bit squary for me likings. nevertheless, its good to be different 
