Polo by Davitio 1.6 TDI 90HP DSG

[davitio_979]

Goodnight!!
Congratulations to all the users that make this forum possible.
You will forgive my English, since I am Spanish.

Well I present to you my Polo DSG that I bought 3 months ago, after doing days that registered I think it is time to do it.







I love doing updates to cars, it's almost a vice !!!

At the Pole there are already many things in mind and the occasional spare part and will be able to do some mod, such as:

Climatronic:

- Central unit 6R0907044H

- Complete air conditioning module 6R1182003AD

- Multimedia rcd330

- Original rear speakers

- Bcm 7e0937090b

- Interior mirror with rain sensor 5Q0 955 547, 3G0 857 511 E

- Composition media 5K7035200F is on standby. (Since if we remove the CP outside the brand will not work, in the dealership it is impossible, according to my knowledge, I will give you more details)

Well this is all for now, I will update the post as much as possible since I will be pope for the third time at the end of the month and I will go a little bit

a greeting

[iichel]

Hello and welcome. Your photos don't seem to be working

[davitio_979]

Sorry, Have now if they work

[ciclo]

Hola davitio_979, welcome.

The images already work.

A link for your information, you will have to investigate in the Russian forum. https://www.drive2.com/l/497271452043575438/

On the other hand, the RLS 5Q0955547 = NO, is not compatible with PQ25 platform (ours 6R), it has to be 5K7955559B, 5K7955559C, or 5K7955547 (RLHS), in combination with the 3G0857511E auto dimming mirror.

---
Congratulations in advance by being father for the third time, ...you are a brave man.

[gtsportms]

Hey Welcome

Iam thinking about to retrofit Climatronic too but i dont now exactly how complicated it is. Do you have a manual?

thx

[davitio_979]

Thank you very much for the info Ciclo, I will have to look for another one.

The installation of climatronic I plan to do it in about 15 days, I will try to upload the maximum information and photos

Regards

[davitio_979]

hello again friends!
After the bad news in my personal life, I have little time to devote myself to my polo.
I only read to distract myself a little.
I hope that little by little, my wife's serious illness will be solved.
Something I'm doing and planning.
one of them is to install a box of amarok 2h0920871A sw805.
I can not finish adapting the Immo, since in vw they could not tell me that I gave them an error when they tried to configure it. is has an epprom 24lc64 I adapted the values ​​for my pole, but the Immo can not. I have the fvdi2018. My idea is to make it a virgin so I can adapt it to my polo. Can you help me??
Thank you

[davitio_979]

Hello friends, I show you my new mod



Enviado desde mi iPhone utilizando Tapatalk

[ciclo]

It looks excellent. Nice job!

(similar to madwarlock's IC)

[davitio_979]

Thanks ciclo !!!! It’s a Toledo cluster in Polo case.

I only had to modify the LEDs of the turn signals, the board allowed the change of location


Enviado desde mi iPhone utilizando Tapatalk

[ag69]

Hello friends, I show you my new mod


Enviado desde mi iPhone utilizando Tapatalk

Very nice.

[ciclo]

Thanks ciclo !!!! It’s a Toledo cluster in Polo case.

I only had to modify the LEDs of the turn signals, the board allowed the change of location


Enviado desde mi iPhone utilizando Tapatalk

OK, do you have any photo/image of Toledo IC board with the LEDs for turn signals already changed?

[davitio_979]

Hello Ciclo

Here the photo of the position of the led.


photo hosting

[exantas]

Hello,

Nice job with the new cluster. It looks great.

Now the question is, the thirty position, is it for turn signals leds also?


One irrelevant question.
I am also in the process of swapping my IC in my car (pq25 platform car) . Still fighting some issues though.

I have a question in case you noticed during your cluster adaptation.

When I remove my old IC and there is no cluster in the car or when I install new cluster that it has not been fully adapted yet, the electric windows stop working. Did you notice something like that when you were working on your cluster swap?

Best regards

Sent from my MI 5 using Tapatalk

[davitio_979]

hello

yes, the other position is also it is.

this happens when the ic changes and the can line does not change from the old ic to the new ic,
since the old one works with a different pin.
I am not sure if it is necessary to change the bcm before the ic,I changed the bcm before.