1 touch electronic window fault

Chat about your 2018+ AW/BZ/AE model Polos here!
Post Reply
Ecko_1
New
Posts: 5
Joined: Thu Sep 12, 2019 10:19 pm
Drives: 2019 Polo AW R Line
Location: ZA

1 touch electronic window fault

Post by Ecko_1 »

I drive a 2019 Polo R Line. Bought it new in Jan 2019. I'm in South Africa.

This week my 1 touch function on the driver window has stopped working. It is the physical switch that no longer has the second click up or down. I don't think resetting the comfort function will fix it.

Has anyone else heard of this problem before?

I plan on taking it to a dealer when I get some time.
User avatar
OomStu_ZA
Gold Member
Posts: 713
Joined: Mon Apr 22, 2019 6:06 pm
Drives: 2019 VW Polo GTi
Location: Cape Town, South Africa

Re: 1 touch electronic window fault

Post by OomStu_ZA »

Elo boet, yes it happened to me with my 6C as well.
There is a setting to restore it but to be honest I dont recall how to at the moment. Call your VW dealership they and will tell you in seconds :)
Ecko_1
New
Posts: 5
Joined: Thu Sep 12, 2019 10:19 pm
Drives: 2019 Polo AW R Line
Location: ZA

Re: 1 touch electronic window fault

Post by Ecko_1 »

OomStu_ZA wrote:Elo boet, yes it happened to me with my 6C as well.
There is a setting to restore it but to be honest I dont recall how to at the moment. Call your VW dealership they and will tell you in seconds :)
I dont think mine will be fixed with a setting. The actual 2nd click is gone on the physical button.
itsgninja
New
Posts: 7
Joined: Sun Aug 04, 2019 10:21 am
Drives: 1.0 TSI R Line
Location: Cape Town

Re: 1 touch electronic window fault

Post by itsgninja »

I have the same issue. Also in SA. Stops working randomly for a few days and then works again after 2 days or so. Going in for a service this week and asking them to check it.
monkeyhanger
Bling Bling Diamond Member
Posts: 2643
Joined: Fri Feb 23, 2018 9:58 pm
Drives: Audi A4 Avant Quattro 40 TDI, Polo GTI+
Location: Newcastle upon Tyne

Re: 1 touch electronic window fault

Post by monkeyhanger »

Setting method is in the manual. It's something like opening the window right up and holding the switch there for 5 seconds after it has reached the bottom, then closing again in one continuous movement and holding the switch for another 5 seconds. Usually needs a reset after battery has been disconnected or if anti-squeeze has been triggered.
RUM4MO
Bling Bling Diamond Member
Posts: 6085
Joined: Sat Dec 30, 2006 9:12 pm
Drives: B8 S4 & 6R/6C1 1.2TSI 110
Location: Mid Lothian

Re: 1 touch electronic window fault

Post by RUM4MO »

But the OP has confirmed that the "feel" of the switch has changed, the second "section" can't be felt, so it should really be a new switch panel that is needed.
Ecko_1
New
Posts: 5
Joined: Thu Sep 12, 2019 10:19 pm
Drives: 2019 Polo AW R Line
Location: ZA

Re: 1 touch electronic window fault

Post by Ecko_1 »

RUM4MO wrote:But the OP has confirmed that the "feel" of the switch has changed, the second "section" can't be felt, so it should really be a new switch panel that is needed.
Yip. Thats my thoughts too. Just to find time to get the car to the dealers
Post Reply

Return to “MK10, MK11 and MK12 (AW/BZ/AE) Polo (inc GTI) - Years 2018 onwards”