VCDS PROGRAMMING

Chat about your 6R/6C model Polos here!
Post Reply
Robbo770
Bronze Member
Posts: 109
Joined: Sat Mar 14, 2020 1:56 am
Drives: Polo SEL 1.4 tdi 2014
Location: Scotland

VCDS PROGRAMMING

Post by Robbo770 »

Hi

Anyone recommend in Aberdeen for programming?

Got full sat nav with appleplay media unit comping and want it all switched on once plugged in, in case the bum shuts it all down again

Cheers Rob
User avatar
iichel
Bling Bling Diamond Member
Posts: 6686
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: VCDS PROGRAMMING

Post by iichel »

I don't know an awful lot about Aberdeen. What I do know is that enabling these functions requires tools a lot more capable and dangerous than vcds (ie Odis or hacking tools)
Robbo770
Bronze Member
Posts: 109
Joined: Sat Mar 14, 2020 1:56 am
Drives: Polo SEL 1.4 tdi 2014
Location: Scotland

Re: VCDS PROGRAMMING

Post by Robbo770 »

Hi I HEL, can you help at all, with now having mib2 discovery spec system, do I need a new usb wiring and socket, if so do you know which ones?

Cheers Rob
RUM4MO
Bling Bling Diamond Member
Posts: 6069
Joined: Sat Dec 30, 2006 9:12 pm
Drives: B8 S4 & 6R/6C1 1.2TSI 110
Location: Mid Lothian

Re: VCDS PROGRAMMING

Post by RUM4MO »

Find out where your local VAG Indies are located and email/phone them to see if they can remove Component Protection - some can some can't it depends on how well they have equipped themselves with VW Group kit and licences - if they can do that, they will be able to change any associated codings required when swopping ICE.

Edit:- I've just noticed your other posting, so most of the above is not needed!
Robbo770
Bronze Member
Posts: 109
Joined: Sat Mar 14, 2020 1:56 am
Drives: Polo SEL 1.4 tdi 2014
Location: Scotland

Re: VCDS PROGRAMMING

Post by Robbo770 »

Thanks for the reply,

Would you happen to known the part numbers of the upgrade cabling and the suitable usb socket I need to get to finish the u[grade off?

Cheers Rob
RUM4MO
Bling Bling Diamond Member
Posts: 6069
Joined: Sat Dec 30, 2006 9:12 pm
Drives: B8 S4 & 6R/6C1 1.2TSI 110
Location: Mid Lothian

Re: VCDS PROGRAMMING

Post by RUM4MO »

Sorry, no, the online resource that I normally use seems to have been taken down or currently not available as I was looking for another part number earlier today - it might reappear later/tomorrow/etc so I'll keep looking.
Post Reply