Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
I still have some time to install the A5 camera, the decisive thing is the calibration.
I will have to install the 8IU LED headlights and wait some time with the current camera for HBA.
Between the pandemic and half the world fighting like little children, I want to go to Australia as soon as possible...
ciclo wrote: Thu Feb 11, 2021 1:58 pm
I still have some time to install the A5 camera, the decisive thing is the calibration.
I will have to install the 8IU LED headlights and wait some time with the current camera for HBA.
Between the pandemic and half the world fighting like little children, I want to go to Australia as soon as possible...
Today I installed the wiring harness for the a5 camera Remaining camera for calibration:)
Glass replaced,Now I have to check if it works
Attachments
149431413_2926876557545556_8401759844614893261_n.jpg (67.24 KiB) Viewed 18363 times
149114708_738503990203384_3660279595902796721_n.jpg (48.51 KiB) Viewed 18363 times
149507831_891662161394628_4322944783744419695_n.jpg (66.01 KiB) Viewed 18363 times
ciclo wrote: Sat Feb 13, 2021 6:35 pm
Great, it looks good.
Any special tips to fully remove the A-pillar trim?
---
snow on the roof?
I had a problem getting him out
They hold the three hooks firmly from the top, it is more difficult to put it back on
,It is now a cold winter in Poland
Do I have to calibrate the A5 camera first to code the options? I wanted to change the encoding but it pops up Coding rejected, Error 31: Request out of range I also wanted to change the paramatrization, erorr pops up
Thank you
Attachments
IMG_20210213_120045.jpg (139.9 KiB) Viewed 18336 times
dcgumis wrote: Sat Feb 13, 2021 9:38 pm
Do I have to calibrate the A5 camera first to code the options? I wanted to change the encoding but it pops up Coding rejected, Error 31: Request out of range I also wanted to change the paramatrization, erorr pops up
Thank you
I don't know what is happening, I have not done this process yet, it is best if you ask Slavik.
Please post here what was the issue you had. Thanks.
Address A5: Frt Sens. Drv. Assist Labels: 3Q0-980-65X-A5.clb
Control Module Part Number: 3Q0 980 654 H HW: 3Q0 980 654 A
Component and/or Version: MQB_B_MFK H09 0272
Software Coding: 0002070600000401002200448150A90084000E000000
Work Shop Code: WSC 00020 999 00000
ASAM Dataset: EV_MFKBoschMQBB 001001 (VW37)
ROD: EV_MFKBoschMQBB_001_VW36.rod
VCID: 3C2131DD76E9587B6FA-8068
10 Faults Found:
0768 - No Basic Setting
B2010 00 [008] - -
[Calibration_VIN_mismatch]
Intermittent - Confirmed - Tested Since Memory Clear
0646 - Control Module Incorrectly Coded
U1014 00 [008] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Intermittent - Confirmed - Tested Since Memory Clear
0788 - Camera Interference
C1104 00 [008] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Intermittent - Confirmed - Tested Since Memory Clear
0789 - Camera Interference
C1104 00 [008] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Intermittent - Confirmed - Tested Since Memory Clear
1134 - Camera Interference
C1104 00 [008] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Intermittent - Confirmed - Tested Since Memory Clear
1295 - Camera Interference
C1104 00 [008] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Intermittent - Confirmed - Tested Since Memory Clear
0659 - Steering
C10AC F2 [009] - Lane-Holding Assistance Not Coded
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Confirmed - Tested Since Memory Clear
1347 - Camera Interference
C1104 00 [008] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Intermittent - Confirmed - Tested Since Memory Clear
0635 - Camera Interference
C1104 00 [008] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Intermittent - Confirmed - Tested Since Memory Clear
0415 - Camera Interference
C1104 00 [008] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Intermittent - Confirmed - Tested Since Memory Clear
I also bought mine on eBay, but when I buy units of some relevance I have the habit of buying them from Germany (a little more expensive at times), mine according to the seller comes from a Golf 7.5, I hope to be lucky in this regard.
ciclo wrote: Sat Feb 20, 2021 1:00 pm
I also bought mine on eBay, but when I buy units of some relevance I have the habit of buying them from Germany (a little more expensive at times), mine according to the seller comes from a Golf 7.5, I hope to be lucky in this regard.
DLA wants to too, but a little later I have to buy headlights first, but I wonder if my current lamp modules will fit for DLA, or are they different for DLA.I have a 7P5 941 572A(AV0,AV1) A module Because I can change right-hand or left-hand traffic on the radio.In PR headlamps: 8IU There is no pr code in module 7P5 941 572 A
TJA Likewise, I thought that only for dsg.
ciclo wrote: Sat Feb 27, 2021 9:55 am
The control units of your current LED headlights are correct, they should only be flashed for Matrix headlights when you install 8IU LED headlights.
OK Thank you for the information
Steering wheel 5G0419091HQ
Attachments
IMG_20210226_114433.jpg (160.63 KiB) Viewed 18014 times
IMG_20210308_145107.jpg (243.97 KiB) Viewed 18014 times
IMG_20210308_173948.jpg (271.13 KiB) Viewed 18014 times