Hey everyone I recently bought a polo 2014 but the rear wiper had been completely removed so I have bought a new rear wiper motor and wiper arm but when I’m trying to fit the motor to the bolts on the boot lid I can’t seem to find a nut that will fit the bolts I’ve tried an M6, M8 and M10 and none of them fit
Anybody know which size of nut I need to fit this motor to the boot lid? Thanks
Fitting rear wiper motor help!
-
TrebleTA
- Bronze Member
- Posts: 182
- Joined: Thu Jul 02, 2020 10:03 am
- Drives: 2021-22 GTI+
- Location: South East (UK) Haywards Heath.
Re: Fitting rear wiper motor help!
Any chance of a picture, of the placement of the motor and were the missing bolt is needed?
-
CarbonChaos
- Silver Member
- Posts: 461
- Joined: Mon Sep 03, 2018 9:43 pm
- Drives: 2015 6C GTI DSG Oryx white 3 door.
- Location: South west uk
Re: Fitting rear wiper motor help!
If my memory serves correctly i belive there are 3 studs on the tailgate which the motor slips over and you attatch M6 nuts to fix it securely,these m6 may be a odd thread pitch. what thread pitch were the m6 nuts you have tried ?
-
amer6R
- Platinum Member
- Posts: 1301
- Joined: Thu Feb 06, 2020 7:57 am
- Drives: Polo 6R 2010 1.6 TDI
- Location: budget build
Re: Fitting rear wiper motor help!
N90714303 (3pcs) go to dealer and buy they aren't expensive
https://volkswagen.7zap.com/en/rdw/polo ... -955020/#8
There you can look for all parts you need.
( Probably m6x0.75 or m6x1.0) those are standard thread pitches
https://volkswagen.7zap.com/en/rdw/polo ... -955020/#8
There you can look for all parts you need.
( Probably m6x0.75 or m6x1.0) those are standard thread pitches