Hi again Zainf7
Please arrange for VCDS preferably, and get an autoscan and post here.
We need your BCM long coding, so that it can be edited to work with your aftermarket bixenons.
Your BCM should know that bixenons have been installed, so that it provides adequate power supply to your bixenons.It is currently coded for halogens. If coded correctly flickering should stop.
I had a similar situation like you with my aftermarket bixenons I had installed previously, with the help of Master ciclo and many thanks to him I learnt that BCM coding has to be changed for BCM Max( Not for BCM high/low.. these aftermarket bixenons work fine with low BCM's).
The errors might hang after coding change but bixenons should work fine.
![Smile :)](./images/smilies/icon_smile.gif)