Oh dear looks like am out of luckiichel wrote: ↑Wed Feb 15, 2023 2:53 pm I don't think it's possible to read it: https://mhhauto.com/Thread-Where-is-the ... K7-Cluster
Help needed for Cluster swap on a Polo 6C
Re: Help needed for Cluster swap on a Polo 6C
Re: Help needed for Cluster swap on a Polo 6C
Anybody have a guide on how to retrofit lowline camera? I got the wiring but there is no instructions on where the wiring goes?
Re: Help needed for Cluster swap on a Polo 6C
All sorted and got the RVC working.
Wiring was very easy
VCDS just 1 tick to get it working
Wiring was very easy
VCDS just 1 tick to get it working
- iichel
- Bling Bling Diamond Member
- Posts: 6420
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: Help needed for Cluster swap on a Polo 6C
Well done. This means all your problems solved?
Re: Help needed for Cluster swap on a Polo 6C
Hi mate,
I am looking to do the same procedure. I right now have a cluster in KMH and would like to purchase one in MPH. Did you just buy a used mph cluster on eBay, then get it adjusted for your car? I am worried about the immobiliser's not matching and the vehicles milage being lost/confused. If possible could you link me to this gentleman you used?
Many thanks
Also I think you can read the EEPROM on your old cluster, you need to read it directly off the processor, this can be done using a device such as Xprog. Let me know your old clusters part number and maybe I can clarify a bit more.
Re: Help needed for Cluster swap on a Polo 6C
Hi Pal, yes I bought a used Cluster from Ebay that matched the vehicle in question.mubmoh wrote: ↑Sat Apr 22, 2023 5:13 amHi mate,
I am looking to do the same procedure. I right now have a cluster in KMH and would like to purchase one in MPH. Did you just buy a used mph cluster on eBay, then get it adjusted for your car? I am worried about the immobiliser's not matching and the vehicles milage being lost/confused. If possible could you link me to this gentleman you used?
Many thanks
Also I think you can read the EEPROM on your old cluster, you need to read it directly off the processor, this can be done using a device such as Xprog. Let me know your old clusters part number and maybe I can clarify a bit more.
You will need somebody with Online access tool i.e. ODIS. My recommendation will be to find somebody local who can do the swap for you and is experienced.
I was mislead many times by a person in wales and I wasted time going back and forth.