Blue GT (2015) Vibration Under Load

[NeilyM]

Good evening,

I hope I've landed at the right place?

My car has suddenly developed a vibration when accelerating fairly hard. My mechanic friend has checked the VAG OBD diagnostics it has returned the following:

Cam adjuster "B" cylinder 2 (self switching)

Could anyone tell me whether cam adjuster B is on the intake side or on the exhaust side & how easy it is to replace if possible please?

Thank you in advance.

Neil.

[2226]

What was the actual error code number (starts with P usually)?
This might get you more help.

[NeilyM]

Hi,

Sorry, it's P12CA00.

[ciclo]

Good evening,

For 1.4l petrol engine , CZEA

N583 Inlet cam actuator for cylinder 2
N591 Inlet cam actuator for cylinder 3
N587 Exhaust cam actuator for cylinder 2
N595 Exhaust cam actuator for cylinder 3

A or B is only defined for 1.8l petrol engine , DAJA, DAJB. I assume this depends on the diagnostic tool used...









Bolt torque:
- c act 8Nm
- hose 5Nm

[NeilyM]

Thank you, that's a lot of helpful information.

The units used were an OBD Eleven & a Solus+, both showed the same fault.

Which part do you think I need?

[ciclo]

P12CA00 The energy consumption of the fuel injector of cylinder 1 has exceeded the upper limit value.

You must use a diagnostic tool that will accurately inform you of the part that is failing. N5.. ?

[NeilyM]

Ah, I see, is there a diagnostic tool that you could recommend or should I just take it to VW?

[ciclo]

I would try with VCDS, it is usually precise in these terms/definitions. Without a doubt, the VAS would tell you exactly what you want to know.

There are undoubtedly very good diagnostic tools that are very easy to use "", but I consider that these 2 are the most reliable for these issues.