iichels VW Passat 2.0 TSI DSG 4-Motion 2017

A section of the forum for members to show off their non-polo vehicles.
User avatar
iichel
Bling Bling Diamond Member
Posts: 6685
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: iichels VW Passat 2.0 TSI DSG 4-Motion 2017

Post by iichel »

The latest breed of VW cars don't have headlight washers anymore, probably as a cost-saving measure. Little that I knew, my latest BCM doesn't have the little PCB components on it anymore to operate the pump for that.

So... after some research, the missing components were quickly transferred from a donor 5Q0 BCM to my 2024 5Q1 BCM and all is working. Big thanks to the one and only Slavik.

Image

https://imgur.com/a/Q8DsDM9
patil
Gold Member
Posts: 576
Joined: Wed Dec 07, 2016 8:34 pm
Drives: Polo6r/1.2TSI/DSG7, T-roc'20 1.5TSI/DSG7
Location: Foothills of Nilgiris, India

Re: iichels VW Passat 2.0 TSI DSG 4-Motion 2017

Post by patil »

Wow.. great job you both👍
I like it, you went Russian's way of fixing the problem :mrgreen:
User avatar
ciclo
Bling Bling Diamond Member
Posts: 8836
Joined: Sun Feb 24, 2013 10:20 am
Drives: 6R'13/G7.5'19
Location: Earth ♥, Spain.
Contact:

Re: iichels VW Passat 2.0 TSI DSG 4-Motion 2017

Post by ciclo »

Well done, perfect!
I love seeing how the components line up when using the flux and solder paste, it seems like the components have a built-in PDC/PLA auto-parking system.
I'm stunned watching them park. :lol:
User avatar
iichel
Bling Bling Diamond Member
Posts: 6685
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: iichels VW Passat 2.0 TSI DSG 4-Motion 2017

Post by iichel »

The Passats historically have the rear child booster seats. Since I already have the independent rear child locks, rear seat heating and the rear window curtains OEM, I figured I'd need these two.

The base:

Image

Etka --> 885-020

Image

Problem 1: couldn't find one with a white stitching. So I asked a good friend to replace the stitch, like she did for my gear lever.

Problem 2: no rear seat heating. That simply doesn't exist from factory. So I put in some pads myself...

Needs a lot of tiewraps to put it all back together

Image

Image

But the result is pretty neat!

Image

The bump in the middle is the seat heating pad and I'm afraid it's not going away anytime soon, but that's life. :mrgreen: :twisted:
rhinopower
New
Posts: 6
Joined: Tue Jan 03, 2023 8:17 pm
Drives: Not at the moment
Location: Stevenage

Re: iichels VW Passat 2.0 TSI DSG 4-Motion 2017

Post by rhinopower »

iichel wrote: Thu Nov 16, 2023 2:29 pm

Code: Select all

Address A5: Frt Sens. Drv. Assist (R242)       Labels:| 2Q0-980-653.clb
   Part No SW: 2Q0 980 653 C    HW: 2Q0 980 653 
   Component: MQB MFK 3.0   H16 1302  
   Serial number: E80320003220200 Dataset Number: V03935368RP 0001
   Coding: 0004019821FEC024889F14001020004000438000000000000000000000000000
   ASAM Dataset: EV_MFK3ValeoMQB 007042
   ROD: EV_MFK3ValeoMQB_007_VW27.rod
   VCID: 3537DC9565C39362ECD-8060

No fault code found.
to

Code: Select all

Address A5: Frt Sens. Drv. Assist (R242)       Labels:| 2Q0-980-653.clb
   Part No SW: 2Q0 980 653 D    HW: 2Q0 980 653 
   Component: MQB MFK 3.0   H16 1421  
   Serial number: E80320003220200 Dataset Number: V03935368RP 0001
   Coding: 0004019821FEC024889F14001020004000438000000000000000000000000000
   ASAM Dataset: EV_MFK3ValeoMQB 007042
   ROD: EV_MFK3ValeoMQB_007_VW27.rod
   VCID: 3537DC9565C39362ECD-8060

No fault code found.
needs a dataset but SWAP + calibration are maintained

upcoming mods:
- 42, 52, BB and BC modules upgrade from 5Q0 HW: E + SW: E to 5Q0 HW: F and SW: K/L
- BCM 084EC
- 2Q0 side assist
- Kessy module to N/Q SW
- I'm unsure if the 084E BCM will work with the 5Q0 slip ring, so Patil inspired me about 5Q1 slip rings. I'll give that a try too.
Can you help me with D revision data set? I'm also retrofitting 2Q0 A5 to my 2017 B8 Passat
User avatar
iichel
Bling Bling Diamond Member
Posts: 6685
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: iichels VW Passat 2.0 TSI DSG 4-Motion 2017

Post by iichel »

I took it from mibsolution : 8)
rhinopower
New
Posts: 6
Joined: Tue Jan 03, 2023 8:17 pm
Drives: Not at the moment
Location: Stevenage

Re: iichels VW Passat 2.0 TSI DSG 4-Motion 2017

Post by rhinopower »

Site is down. Im going to flash to 1401 to match a vin number i have and run SVM, and capture the file instead incase i need again

Thanks mate
rhinopower
New
Posts: 6
Joined: Tue Jan 03, 2023 8:17 pm
Drives: Not at the moment
Location: Stevenage

Re: iichels VW Passat 2.0 TSI DSG 4-Motion 2017

Post by rhinopower »

2Q0 Camera all sorted and Swaps etc done

Only issue now is KLR. Wheel has 5H0 klr module, does it have to be 3G0 instead, or do i just need to update gateway? Currently 3Q0 907 530 H continental gateway, GTE version
User avatar
iichel
Bling Bling Diamond Member
Posts: 6685
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: iichels VW Passat 2.0 TSI DSG 4-Motion 2017

Post by iichel »

5h0 KLR is working perfectly fine here.
rhinopower
New
Posts: 6
Joined: Tue Jan 03, 2023 8:17 pm
Drives: Not at the moment
Location: Stevenage

Re: iichels VW Passat 2.0 TSI DSG 4-Motion 2017

Post by rhinopower »

Adp channel for wheel touch recognition is not available on gateway for me, so looks like gateway flash to solve then!
User avatar
iichel
Bling Bling Diamond Member
Posts: 6685
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: iichels VW Passat 2.0 TSI DSG 4-Motion 2017

Post by iichel »

Yeah I'd update the gateway then, IIRC you need AR SW for hybrid drivetrain. You can use FPA editor for dataset.
Viperslider
New
Posts: 22
Joined: Tue Feb 01, 2022 2:44 pm
Drives: Seat Leon 5F Cupra ST 290
Location: South Wales

Re: iichels VW Passat 2.0 TSI DSG 4-Motion 2017

Post by Viperslider »

Some fantastic things here! Good work!

Once my Leon 5F returns from Seat with it's brand new zero mile engine, hopefully next week, I can carry on with my MQB retrofit attacks. I have missed it so much!

Anything more in the pipeline?
User avatar
iichel
Bling Bling Diamond Member
Posts: 6685
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: iichels VW Passat 2.0 TSI DSG 4-Motion 2017

Post by iichel »

For now it will be the new engine, dq500 and the torque vectoring rear differential.
User avatar
iichel
Bling Bling Diamond Member
Posts: 6685
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: iichels VW Passat 2.0 TSI DSG 4-Motion 2017

Post by iichel »

Code: Select all

Address 02: Auto Trans (J743)       Labels:. 0BH-927-711.clb
   Part No SW: 0DL 300 012     HW: 0BH 927 711 F
   Component: GSG DQ500     H10 5301  
   Revision: 00H10V01    
   Coding: 0014
   Shop #: WSC 00000 000 00000
   ASAM Dataset: EV_TCMDQ500021 001001
   ROD: EV_TCMDQ500021_001_VW36.rod
   VCID: 66954BD968E528FAC5F-8032

No fault code found.
:twisted: :twisted: :twisted:

Image

Image

Image

Yes that's a DQ500 with a Continental mechatronic. It was adapted online via ODIS eventually, after a lot of trouble
The Continental mechatronic cannot be made immo-off, it can only be done for the later Bosch DQ500 / DQ381 mechatronic.

Image

This is an SDM gearbox from the 2017 Passat B8 2.0 TSI alltrack (CHHB), these got the DQ381 in 2018.

How does it sound??
https://i.imgur.com/V8qBjGY.mp4
User avatar
Maarten
Gold Member
Posts: 557
Joined: Tue Aug 11, 2015 9:45 am
Drives: 2024 VW T-ROC R-line 1.5TSI Lapiz Blue
Location: The Netherlands

Re: iichels VW Passat 2.0 TSI DSG 4-Motion 2017

Post by Maarten »

Very very nice!
Post Reply