6C Fuel Pump mice / Looking for fuel plug photo

[will3733]

Hey UKPolos, Found some mice that have kindly been living above my fuel pump which is why my gauge would sometimes intermittently stop and start (usually for a minute or so)

Someone that works for my Dad's garage put a new fuel plug on for me but I'm still getting a fuel pump gauge error (the garage isn't a specialist and doesn't do wiring by trade)

The pump works and I can drive but I have no gauge (have to reset the mile counter and fill it to the brim around 350 - 400 miles)

I tried to clear the fault in VCDS but its still showing an error "Resistance too high"

Code: Select all

Address 17: Instruments (J285)       Labels:| 5G0-920-XXX-17.clb-SRI3
   Part No SW: 6C0 920 930     HW: 6C0 920 930 
   Component: KOMBI         110 0260  
   Coding: 2735090021002600010838000000000000000000
   Shop #: WSC 31414 790 50316
   ASAM Dataset: EV_DashBoardVDDMQBAB 009036
   ROD: EV_DashBoardVDDMQBAB_009_VW26.rod
   VCID: 60CF16817B43A44AB5-8034

2 Faults Found:
1048578 - No Basic Setting 
          B2010 00 [009] -  - 
          [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 133
                    Mileage: 155335 km
                    Date: 2024.09.16
                    Time: 15:13:24

9453074 - Fuel Level Sensor 1 
          B103E 1B [009] - Resistance Too High
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 133
                    Mileage: 155335 km
                    Date: 2024.09.16
                    Time: 15:13:24

https://i.imgur.com/1hdGqdY.jpeg


New Plug

https://i.imgur.com/2pHsYVw.jpeg

https://i.imgur.com/9HEB4qU.jpeg


If anyone else with a 6C is able to send me a photo of their fuel plug so I can check the data wires are correctly connected I would be very grateful

If anyone has any suggestions as to what the fix / issue could be, I would be very grateful

My dad said they tried another fuel pump itself from the scrap yard which had the same issue

[will3733]

I managed to find a salvage photo online which shows the colour of the original plug wires, it looks like the wiring on my new plug is correct

I googled 6C0 920 930 from my VCDS scan and it looks like that PN is for the ODO/gauge cluster I wonder if that's where the fault lies

If anyone has replaced this before or has any tips or info that would be appreciated