Polo 6R - Useful Part Numbers

[Le_Combattant]

Hello !

On ETKA I was loocking for the wiring support clipsed into the roof of the Polo 6C (over the passenger/conductor) but impossible to found them on ETKA even after 2-3h of searching.

One looks like this:

pcto.jpg (2.25 MiB) Viewed 11722 times

and the other, more "classic"

37nh.jpg (2.28 MiB) Viewed 11722 times

Thank your for your help

[amer6R]

Hello !

On ETKA I was loocking for the wiring support clipsed into the roof of the Polo 6C (over the passenger/conductor) but impossible to found them on ETKA even after 2-3h of searching.

One looks like this:
pcto.jpg

and the other, more "classic"
37nh.jpg

Thank your for your help

Try using etka- common parts section of catalog. There are many clips and you have to go one by one. Only issues on these free etkas pictures arent available :/

[Le_Combattant]

Hello !

On ETKA I was loocking for the wiring support clipsed into the roof of the Polo 6C (over the passenger/conductor) but impossible to found them on ETKA even after 2-3h of searching.

One looks like this:
pcto.jpg

and the other, more "classic"
37nh.jpg

Thank your for your help

Try using etka- common parts section of catalog. There are many clips and you have to go one by one. Only issues on these free etkas pictures arent available :/

Yes It's what I did but even here, impossible to find something, or maybe I missed it.
On a paper, I noted all part number without any picture and I made research on ETKA to find them (no matter the car, just to see it's shape) but no.

I have to see, if by removing some parts (sunshade, screw) I can lower the headliner enought to get access on the upper part to see if there is any part number.

[amer6R]

This one is similar, but shorter
WHT004916
4B0 971 848
N 91115901
6Q0971848P
1T0971930A
1J0971445C

Please check these with underline. The round hole one i cant seem to find identical (your has a bend)

[iichel]

is it perhaps 3B0971848F?

[Le_Combattant]

Unfortunately nop

Almost the same shape but the lenght is too short.

[amer6R]

Unfortunately nop

Almost the same shape but the lenght is too short.

3d print one and forget about it
( Just use cloth tape, and stick the loom to the body. )
Or get the one without a bend and use heatgun to form the bend.

[iichel]

1K0971930C?
and
6Q0971848P?

[Le_Combattant]

1K0971930C?
and
6Q0971848P?

6Q0971848P yeah for the "straight" one
1K0971930C looks almost the same, maybe a revision ?

[iichel]

yeah if this isn't the one then that cable clip can go fck itself

[Le_Combattant]

New day, new part I'm looking for.
Man, I'm complaining about IPC (Illustrated part catalog) from Boeing sometimes (I'm aircraft engineer) but the VW's one it total s**t.

This one now:

PXL_20250709_170207703.jpg (2.41 MiB) Viewed 10493 times

PXL_20250709_170201912.jpg (2.26 MiB) Viewed 10493 times

This metal part is the main bracket for the lower center console.
I don't know what happen when they built my car but:

-the part was slightly bent
and
-they forgot to install 2 screws

This is the main reason for why it was so hard to remove and install. But VW decided to install a little cable holder, white one whith the famouse Xmas tree.
Impossible to remove without destroying it.

And of course, not part number on it.

[iichel]

I know this one, they have been replaced with 4B0971848

[Le_Combattant]

I know this one, they have been replaced with 4B0971848

Oh man, If it's true I'm gonna give you a kiss.

Those little s**t are pain in the ass to remove.

[ciclo]

https://www.youtube.com/watch?v=EJPN69EpoR4&t=14s 🏖

[Le_Combattant]

Oooooh it's a nice one

EDIT: even there, impossible to found my previous part request...come on VW !