Where to get a few parts

Chat about your MKIV (6N) Polo
Post Reply
srbpower
Bronze Member
Posts: 103
Joined: Sun Sep 19, 2004 3:06 pm
Location: Notts/Essex
Contact:

Where to get a few parts

Post by srbpower »

Sorry guys, tell me to **** off if you like :cry: :lol:

Right need to start fixing the cosmetic bits on our polo, so does any one know of where I can get the following parts. New or of a breaker, don't mind.

I need:

The cover that goes over the rear wiper join, basically the cap that cover the joiner.

A drivers side door pin.

A new arial, as ours is a bit of a state.

Also does anyone have access to the front bottom grill from a 16v front bumper. Ours has be KO'd by a stone at some point in its life :(

I think thats it..... for now :wink:

Si :)
User avatar
bstardchild
Moderator
Posts: 3057
Joined: Sun Mar 28, 2004 9:53 pm
Location: Norfolk - "Its just Black & Dirty"

Re: Where to get a few parts

Post by bstardchild »

srbpower wrote:Sorry guys, tell me to **** off if you like :cry: :lol:
Shan't do that..... :lol:
srbpower wrote:Right need to start fixing the cosmetic bits on our polo, so does any one know of where I can get the following parts. New or of a breaker, don't mind.
Martyn @ Vagparts - post at the bottom of the forum for prices
srbpower wrote:The cover that goes over the rear wiper join, basically the cap that cover the joiner.
One on ebay at the moment for 99p or Vagparts again
srbpower wrote:A drivers side door pin.
Vagparts - shouldn't be much cash
srbpower wrote:A new arial, as ours is a bit of a state.
One on Ebay for £1.00 or Vagparts again - have a look at the potential group buy that may well happen soon :lol:
srbpower wrote:Also does anyone have access to the front bottom grill from a 16v front bumper. Ours has be KO'd by a stone at some point in its life :(
Vagparts - he's quoted for those several times
srbpower wrote:I think thats it..... for now :wink:

Si :)
If you have a brouse thro the Vagparts section I think most of the parts you are loking for have been priced before - I don't think anything looked unreasonable price wise - he's quick to despatch and deliver I'd use him over my local dealer/stealer everytime - just cos he actually knows what bits go where
srbpower
Bronze Member
Posts: 103
Joined: Sun Sep 19, 2004 3:06 pm
Location: Notts/Essex
Contact:

Post by srbpower »

Cheers mate, I'll drop them a line.

I wonder if he does trade prices :wink: :lol:

Cheers
Si :)
david burton
Bling Bling Diamond Member
Posts: 3082
Joined: Wed Aug 06, 2003 2:31 pm
Location: Reading
Contact:

Post by david burton »

which bit of the arial do you need? i have a spare one of the ends
srbpower
Bronze Member
Posts: 103
Joined: Sun Sep 19, 2004 3:06 pm
Location: Notts/Essex
Contact:

Post by srbpower »

Basically the whole bit that unscrews. The plastic has split on it :(

How much you after matey?

Si :)
david burton
Bling Bling Diamond Member
Posts: 3082
Joined: Wed Aug 06, 2003 2:31 pm
Location: Reading
Contact:

Post by david burton »

f**k i can't find it now :( searched everywhere

sorry
srbpower
Bronze Member
Posts: 103
Joined: Sun Sep 19, 2004 3:06 pm
Location: Notts/Essex
Contact:

Post by srbpower »

No worries mate :) Hopefully going to get one of those stubby ones in the group buy :)

Si :)
Post Reply