Just a thought - tyres...

sylonien · Post by **sylonien** » Wed Nov 03, 2004 11:47 pm

I was wondering, if you guys replaced the standard alloys from the manufacture with some other ones and tyres. How would we know about the tyre pressure for it?

'cos originnally it'll be inside the tank flap wouldn't it?

And when we swap the 4alloys with 17", will the standard spare wheel still be useable?

Jus wondered. Thanks.

carmadaaron · Post by **carmadaaron** » Thu Nov 04, 2004 3:24 pm

the tyre pressures would usually stay more or less the same. sumthing around 2.1 bar is fine.

mine are 2.1 bar

to the second part of ur question, its yes! u can drive a car with 3 17" wheels and a 14"

. thing is, better just be temporary!

sylonien · Post by **sylonien** » Thu Nov 04, 2004 7:08 pm

Hmm aha interesting.

Well not in my case about the spare wheel. Isn't there.

Trying to save weight.

carmadaaron · Post by **carmadaaron** » Fri Nov 05, 2004 10:25 am

IMO it doesnt save that much weight.

if ur after a stripped out car full on road racer, then maybe

jon_poloV · Post by **jon_poloV** » Mon Nov 22, 2004 4:40 pm

carmadaaron wrote:IMO it doesnt save that much weight.

youd be suprised!
jon