Who sells trim?
-
taylor4502
- New
- Posts: 11
- Joined: Wed Mar 03, 2004 8:21 am
- Location: Kent
Who sells trim?
Anyone know where I can get the black trim that sticks to the b post (VW call it foil)? My dealer can't get it anymore and mine's starting to peel off.
-
Tahrey1043
- Bling Bling Diamond Member
- Posts: 5184
- Joined: Thu Sep 18, 2003 1:15 am
- Location: Birmingham! Enjoys: The pseudo-G-Smiles provided by a 1.6 Megane Sport valver...
- Contact:
-
Karl_CLCoupe
- Platinum Member
- Posts: 1131
- Joined: Thu May 06, 2004 11:43 am
- Location: Southport AKA: Mr Sambuca
- Contact:
-
Tahrey1043
- Bling Bling Diamond Member
- Posts: 5184
- Joined: Thu Sep 18, 2003 1:15 am
- Location: Birmingham! Enjoys: The pseudo-G-Smiles provided by a 1.6 Megane Sport valver...
- Contact:
-
Karl_CLCoupe
- Platinum Member
- Posts: 1131
- Joined: Thu May 06, 2004 11:43 am
- Location: Southport AKA: Mr Sambuca
- Contact:
Sorry to disappoint you metz, but I tried Martyn last month (I think) for some of the Polo covers, theyve gone obsoletemetz wrote:i was gunna peel mine off when its warmoutside again (next year) see n as though its painted underneath
if it peals paint off i may buy the ones that say polo all over them
Karl.
-
Steve_O
- Silver Member
- Posts: 293
- Joined: Fri Sep 10, 2004 3:46 am
- Location: Bristol, UK Drives: '91 GT Hatch
- Contact:
Oh well - i've taken the passenger side one off anyway!! The adhesive comes off the plastic moulding quite easily, but somewhat annoyingly, i'm left with a load of very sticky marks on my b-pillar.
The usual chemical methods won't shift it (and i don't wanna resort to anything too strong around my paintwork!!
) but good old hot water and fairy seems to be doing the trick.
Anyway - the good news is, the plastic moulding seems perfectly reusable (i think it may be thicker than the stuff used on late mk2s).
Will have to have a go at the other one when it gets light again!!
The usual chemical methods won't shift it (and i don't wanna resort to anything too strong around my paintwork!!
Anyway - the good news is, the plastic moulding seems perfectly reusable (i think it may be thicker than the stuff used on late mk2s).
Will have to have a go at the other one when it gets light again!!
-
hardhitter
- Moderator
- Posts: 1249
- Joined: Mon Oct 14, 2002 10:35 pm
- Location: Derbyshire 3F Guru
- Contact: