Service Codes

kr1s77 · Post by **kr1s77** » Tue Nov 23, 2004 3:14 pm

This may sound stupid but i have to ask it anyway.

If the in02 code is left on long enough, will it stop the vehicle from starting/running?

Also does anyone know of any VW specialists in birmingham??

Thanks

david burton · Post by **david burton** » Tue Nov 23, 2004 3:49 pm

I don't think so....

You can reset it easily anyway - hold the reset button down, turn the ignition on whilst still holding it down, wait for 10 secs and it clears.

I know of a specialist near Shirley - Autovolks. Getting my door adjusted there this Friday. They're good, apparently.

kr1s77 · Post by **kr1s77** » Wed Nov 24, 2004 6:16 pm

tried to reset it but it didn't work, you did mean the trip rest button didn't you

?

david burton · Post by **david burton** » Wed Nov 24, 2004 7:03 pm

yeah that's the one - should have worked....

kr1s77 · Post by **kr1s77** » Thu Nov 25, 2004 9:07 am

I've done it, this is what i did:

Turn ignition on
Press and hold trip reset button on dash
Switch ign off
Release button
Press and release trip button (keep pressing to scroll through oel-in01-in02)
IN02 will show in the display
Press & hold clock minute button until "-----" is shown
Press trip reset button to show "IN01"
Press clock minute button to show "-----"
Repeat to reset "OEL"
Switch ign on and "IN00" should show