Newbies G40

Post pictures of your car! (Max size 30k each - 800x600)
Post Reply
LregG
Getting There!
Posts: 65
Joined: Sat Jan 15, 2005 4:25 pm

Newbies G40

Post by LregG »

Image

Image


Image

Image

Mines the L reg with the ATS classics (7+8x13") and the j reg is robs who kindly took me to pic it up :D

It is the car off of eBay before anyone asks, got it for £1750 including spares as follows:

VAG rear bumper, set of 7x13" mattigs with 195/45/13 dunlops, orange tint front fogs, wheel arch spats, vag rear spoiler, o/s/r vag rear lamp.

Slight damage to boot lid and bumper and a little dent in o/s/r quarter but apart from, that it's a mint car. 92000 miles, service history and all mots apart from one!!

Plans include:

(*=already done!!)

ENGINE

Pitstop full blend (off the road for the next two weeks for this!!)
toothed pulleys and belt
Green injectors and a SNS remap
de wedged and enlarged throttle butterfly
ported G40 manifold (to the same size or bigger as a gt manifold)
front mounted intercooler
twin entry
BRV to atmosphere
Mk4 rocker cover
jabbasport induction kit (bin the evap and put the filter in the inner wing)
4 branch manifold
de cat *
supersprint system *
oil cooler with electric fan
seperate charger oil system
breather catch tank

TRANSMISSION:

LSD
organic clutch
uprated driveshafts

BODYWORK:

blend and smooth over wing inicator holes *
blend in and smooth under grill panel to wings *
Fully colour code wheel arches and rear spoiler *
Fit indicatored DTM mirrors }
Fit debadged grill } all sprayed same colour as wheels
Respray rear spoiler }
Spray O.E. vag rear bumper and fit
remove dent from tailgate
remove dent from o/s/r quarter
subtle window tint

SUSPENSION:

-30mm Gmax kit *
Polybush everything

BRAKES

22mm master cylinder *
kevlar pads
cross drilled and grooved discs

WHEELS

7x13" mattig steel wheels with different offset for front and rear refurbed in chrome effect paint or chrome dipped (if money allows!!)

INTERIOR

audi tt leather with door card retrim

SECURITY

this and that, my mates staffy :lol:


This little lot will take time and a whole lot of money but it'll be worth it in the end. Pipe dreams at the minute but i'm determined to carry all of this out


What do you think??

Gregg
Post Reply