URGENT LOWERING EMERGANCY!

Chat about your MKV (6N2) Polo
Post Reply
dubmk4
Getting There!
Posts: 70
Joined: Tue Oct 12, 2004 8:03 pm
Location: south wales Drives Corrado 1.8 16v, MK4 Polo

URGENT LOWERING EMERGANCY!

Post by dubmk4 »

Took car in for suspension change new gmax shocks and springs with 50mm drop. garage could only get rear done due to front struts being to seized, BUT the back end with the new springs is HIGHER :shock: than it used to be.Is this just the springs needing to settle down as there new and stiff then it will get lower? or is my car going to look for a land rover for the rest of its life. :cry: Bumpstops were trimmed as manual said.need help
tom_mk5
Silver Member
Posts: 391
Joined: Sun Jul 11, 2004 11:42 pm
Location: West Yorks

Post by tom_mk5 »

I've been told the springs need about a week to settle. They won't stay like that. Chances are once you've been out for a good drive or two they will settle and 'lower' themselves.
User avatar
SpikeyG40
Moderator
Posts: 2757
Joined: Tue May 13, 2003 10:50 pm
Location: Soton Status: Vent'ho'd

Post by SpikeyG40 »

if i am reading this right, the back is now lowered but the front isn't!

it does take time for the suspension to settle in and lower, but i think it might also have something to do with the front not being lowered! might need to be even to go down properly!
pettsy
Moderator
Posts: 1958
Joined: Tue Feb 04, 2003 6:38 pm
Location: Derbyshire
Contact:

Post by pettsy »

couple of bags of sand/stones etc for a few days should do the trick :lol:
polopowah
Bling Bling Diamond Member
Posts: 3139
Joined: Tue Feb 10, 2004 5:02 pm
Location: Hertfordshire Drives: Ford Puma 1.7 Enjoys: Mowing grass

Post by polopowah »

totally agree doug&dan (whichever it was who posted :p) when i did my coil-overs i did the rear first and there really wasnt a huge drop noticeable until i came to do the fronts then let it settle a day and hey presto 8)

i'd wait until the fronts are done before getting to stressed about it all
good luck
-Ben-
dubpolo
Sponsor
Posts: 1494
Joined: Sun Dec 07, 2003 12:08 am
Location: ellesmere port

Post by dubpolo »

when i did my coilovers i lowered it down and couldn't get the jack out! :shock: get he fronts done first then if its higher give the g max supplyer a ring!
dubmk4
Getting There!
Posts: 70
Joined: Tue Oct 12, 2004 8:03 pm
Location: south wales Drives Corrado 1.8 16v, MK4 Polo

Post by dubmk4 »

drivin round with 3 spare wheels today and uh... no difference.
Cant get fronts done till tuesday morn earliest.....
dubmk4
Getting There!
Posts: 70
Joined: Tue Oct 12, 2004 8:03 pm
Location: south wales Drives Corrado 1.8 16v, MK4 Polo

Post by dubmk4 »

fronts went on today lookin sweet that end. rear is still abit of a landrover job. Could it be duff rear springs that came with the kit?
JWC
Gold Member
Posts: 642
Joined: Mon Nov 17, 2003 9:11 am
Location: Birmingham
Contact:

Post by JWC »

dubmk4 wrote:fronts went on today lookin sweet that end. rear is still abit of a landrover job. Could it be duff rear springs that came with the kit?
Or the coils are not seated correctly. Haven't looked closely at mine, but the coil has to be rotated all the way until you can't turn it more, otherwise it will be 1/2" too high and could be dangerous. But I find it difficult to believe that both would be wrong.

You could just get a really big Sub! Then you could claim special suspension setup for your ICE!
Post Reply