W8 Light

Pedro_Hilario · Post by **Pedro_Hilario** » Tue Feb 01, 2005 12:20 pm

Hi,

I finally decided to cut through my roof lining and install a W8 Passat Dome Light
At first i wasn't going to connect the intensity ambience lighting
wire since I never use the dimmer BUT it seems that the red leds only work if this wire is connected ( correct me if I'm wrong)
In the DIY Speedlaw advises to connect it to the ilumination wire coming out of the ISO radio. But my radio is not connected to the dimmer of the car. If i connect the 4 pin of the W8 with the wire coming out of the radio will that work? I don't think so...
So where can i connect the W8 ? To car's light intensity control dial? There should be a pink wire right coming out of it if i pry it open, right? Or is there another place in the car where i can find this wire?

Thanks,

Pedro

Speedlaw · Post by **Speedlaw** » Tue Feb 01, 2005 4:33 pm

Yep, the regular way to connect it is directly to the dimmer control. Don't know which color the correct wire has, but I do know that plugging it in the radio directly will not work.

Good luck!

Pedro_Hilario · Post by **Pedro_Hilario** » Tue Feb 01, 2005 6:08 pm

I removed the dimmer control panel ( with the headlight switch and the dimmer) and there is no plug behind the dimmer, only the headlight switch has a plug with several diferent wires. Now the question is, which one to connect with the W8? I couldn't see if any of them was pink, it was getting dark.
Any clues?

Pedro

Pedro_Hilario · Post by **Pedro_Hilario** » Wed Feb 02, 2005 9:25 am

I might have a idea on how to work around this but i need to know one thing. The red leds are ALWAYS on, or only with the key on the ignition or when we turn on the road lights? So that i know how to connect them.

Pedro

Speedlaw · Post by **Speedlaw** » Wed Feb 02, 2005 11:14 am

Mine are on whenever the lights are on.

(hope that helps...)

Pedro_Hilario · Post by **Pedro_Hilario** » Thu Feb 03, 2005 12:51 pm

Thanks Speedlaw, that info was all I needed.

I just connect the leds (1Âº wire) with the instrument panel lights. So when i turn on any of the lights it automatically turns on the red leds. ( I can even adjust the brightness, cool!)

DONE IT! Another W8 modder cruising around

Pedro

Speedlaw · Post by **Speedlaw** » Thu Feb 03, 2005 8:05 pm

Cool Pedro,

Good to hear it worked out OK.