Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Chat about your 9n Polo (inc GT and Fun)
M7
Gold Member
Posts: 658 Joined: Sun Jul 18, 2004 11:55 pm
Location: Newcastle & East Mids
Contact:
Post
by M7 » Tue Apr 05, 2005 10:48 am
anyone know what uprated brakes you can get for the 9n?
i was thinkin about puttin TT discs and callipers on. i think they do 330mm discs or 250mm drilled and vented ones.
anyone know if these fit on? or what other brakes you can get that do fit the 9n.
cheers
M7
Gold Member
Posts: 658 Joined: Sun Jul 18, 2004 11:55 pm
Location: Newcastle & East Mids
Contact:
Post
by M7 » Thu Apr 07, 2005 10:34 pm
someone must know!!
dxg
Moderator
Posts: 1571 Joined: Sat Oct 19, 2002 9:28 pm
Location: Glasgow
Post
by dxg » Thu Apr 07, 2005 10:37 pm
Well, the S3 setup apparently fits the Fabia vRS, so presumably it would fit the 9N also. Ask Toxxin or Josh, they both have this mod.
Deek.
Josh_PoloGTi
Site Admin
Posts: 2782 Joined: Wed Oct 09, 2002 8:32 pm
Drives: BMW E85 Z4 3.0i
Location: Sheffield, UK
Contact:
Post
by Josh_PoloGTi » Thu Apr 07, 2005 11:13 pm
The TT/S3 setup only fits the vRS Fabia as all the rest use the type of brakes that are attached to the hub assy.
The vRS uses "normal" type brakes that have carriers and calipers that seperate from the hub, and therefore can be changed.
M7
Gold Member
Posts: 658 Joined: Sun Jul 18, 2004 11:55 pm
Location: Newcastle & East Mids
Contact:
Post
by M7 » Thu Apr 07, 2005 11:43 pm
can you recomend any that i can use?
evetually planning on a engine transpant, but sorting brakes first, then suspension...then comes box and lump when i save up a hell of alot
vwclub.gr
Bronze Member
Posts: 179 Joined: Sun Jan 02, 2005 3:33 pm
Location: Athens-Greece
Contact:
Post
by vwclub.gr » Fri Apr 08, 2005 2:45 pm
Ibiza Cupra's brakes must fit also. Check it out.
SiDaBa
Sponsor
Posts: 1494 Joined: Fri Jul 25, 2003 12:45 am
Location: Crayford, Kent, UK
Contact:
Post
by SiDaBa » Fri Apr 08, 2005 5:53 pm
Josh_PoloGTi wrote: The TT/S3 setup only fits the vRS Fabia as all the rest use the type of brakes that are attached to the hub assy.
The vRS uses "normal" type brakes that have carriers and calipers that seperate from the hub, and therefore can be changed.
So does the normal rule apply to the polo GT as well? Or am i lucky it falls under the vRS?