im lookn for a back box to give the car a nice sound!
like the upswept DTM letter box(??????) one!
where can u recommend i get one (preferably cheap) and will this have to be changed if i eventually get a 16v rear bumper?????
cheers
back box for 1.0L
-
david burton
- Bling Bling Diamond Member
- Posts: 3082
- Joined: Wed Aug 06, 2003 2:31 pm
- Location: Reading
- Contact:
try to get one on ebay, a good a place as any
as for the 16v bumper, you will have to be careful if you don't want to change the exhaust once you change the bumper. the 16v sticks further out at the bottom of the bumper (rather than curving in much) and is deeper.
Get a zorst that goes UNDER the 8v bumper without needing cutting, and sticks out about 2 inches. then if you get a 16v you can cut the bumper slightly but the exhaust will be pretty flush with it
as for the 16v bumper, you will have to be careful if you don't want to change the exhaust once you change the bumper. the 16v sticks further out at the bottom of the bumper (rather than curving in much) and is deeper.
Get a zorst that goes UNDER the 8v bumper without needing cutting, and sticks out about 2 inches. then if you get a 16v you can cut the bumper slightly but the exhaust will be pretty flush with it