UK-POLOS.NET - THE VW Polo Forum

Connected blue to brown/white where do i connect purple (negative trigger)

You dont lol. Thats just an option for different cars. Cars either have a positive or negative door light system. Polos are positive, so just tape the negative lead up as you dont need to use it.

And finally wat color is my ACC on wire and whre do i connect it

I *think* its brown red. Its the really small wire that comes out of the ignition switch. If its not that, its black yellow

Hi tried them but aint work. I need the wire that tells the alarm the engines running (if you get wat i mean)
Thanks for all the help alex. It`s much apreciated.

Have you got a multimeter mate?

No i`ve got a screw driver you earth then put to wire if theres power the light comes on

Take a look at the plug on the back of the ignition switch - there are a few thin cables. What are the colours?

I`ve been told i can connect it to the wire on my cd player that turns cd player on wen ign on. What wire will this be?

Thats brown red mate. As i said originally?

Connected it to brown/red. But wen car running the alarm goes off cause the vibration sensor triggers.

Hmmm. Have you tested it with ure screwdriver thing to ensure there is a feed on it when the ignition is on?

Yeah no power on either. Apparently there is 2 wires going in to my cd player, red is constant live, yellow is ign live. If i connect it to the yellow would it do same job.

You could, but that is connected to brown red coming from the ignition switch lol!

Does your radio switch on and off with ignition

Yeah radio turns on wen i turn key.