UK-POLOS.NET - THE VW Polo Forum

Connect it to that one then. Wierd tho - its the same lead!

I haven`t checked it yet it might not work. What else could cause it to that.

i bought the same sort of kit the other day, but i just bought the keyless entry, but i tired out the flash light, and it didnt work right or i didnt do it right?

whats the best way to do it so the indecaters* flash when you open and close the car?

and do i need the cable to make the windows go up??

Take panel out were radio is, your hazard switch will click out connect brown to Black/white + other brown to Black/Green. then it`ll work.

braindeadhmster wrote:Take panel out were radio is, your hazard switch will click out connect brown to Black/white + other brown to Black/Green. then it`ll work.

is that easy to pull out? or where is the unit that controls the lights

Its a few screws, or you can just connect it to the loom that runs down from the steering column instead.

ah right cool cool. going to give it a go today and get it down
il let you know how it goes

everything working other than the windows uper bit, it doesnt say what colour of the wire is.

but its a great job. but the wires in the dash were, blacl/green and black/white

I beleive you need another module for total closure in the polos. Its standard on the GTI, but im not sure if lower models have it.

mine works with the keys. but il look in to it


ah something like this ??
http://www.rclick.co.uk/product_info.ph ... cts_id=279

I have the same prob. Let me know how you do it mate