Page 1 of 1

6n dash clock removal...

Posted: Sun Dec 18, 2005 9:39 pm
by M1 TCH
hi guys

how the feck do i remove my clocks from the dash?

hope somone can help.....

thanks

mitch

Posted: Sun Dec 18, 2005 11:53 pm
by Ant_6n
there should be screws on the underside the dash near the clocks
if you put your hands on the steering wheel then move them forwards you should feel them.i've got the haynes manual lyin round somewhere ill dig it out for u.

AnT

Posted: Mon Dec 19, 2005 12:24 am
by OMEGASUPR3ME
hanyes suck! never tell u what u need to know lol! they r good most of the time tho haahahhaa! soz drunk!

Posted: Mon Dec 19, 2005 9:11 am
by dubbprince
there should be two screws either side of the clocks at the top and theres lugs that come out of the clocks at the bottom.
So undo the screws being careful not to lose them down the dash and angle the clocks up and sort of out.

The front binnacle has two screws in the top of it and that also angles out.

all should fit through the steering wheel with precision. :wink:

Posted: Mon Dec 19, 2005 12:15 pm
by Ant_6n
^^^ thats what i was trying to say lol. (could'nt really describe it well) also i t may depend on the year of the car as the 98> changed the design i think.

AnT

Posted: Mon Dec 19, 2005 1:09 pm
by Ant_6n
are you trying the mk5 dash conversion? as im thinkin about doing the same.

AnT

Posted: Mon Dec 19, 2005 9:18 pm
by M1 TCH
thanks guys....

i will try and remove them tomorrow as its now dark.... lol

as for the mk5 dash conversion.... id like too... but i aint sure how dificult it is... i also have a pre 98 polo.....

mitch