Right then, I have a GT that I want dropping 60mm with ATS Classic wheels.
Can someone quickly tell me what kit to buy (just springs) and what offset rims to get? Oh and where the best place to buy them both too.
Cheers.
Suspension and Wheel question
-
- New
- Posts: 4
- Joined: Fri Nov 10, 2006 8:05 pm
- Location: Kent or NW london...
So far.. thumbs up for the FK stuff from Phil.
think she's sitting about 60/60
wheel wise, those are 7x13 classics ET20
need to space out about 10mm at the back, maybe 3mm at the front for g40 brake clearance.
better to get a slightly higher offset and space out than get a one that was too low.. and get pulled over all the time
so personally for 7x13 i'd say roughly et 10 at the back and 20 at the front
think she's sitting about 60/60
wheel wise, those are 7x13 classics ET20
need to space out about 10mm at the back, maybe 3mm at the front for g40 brake clearance.
better to get a slightly higher offset and space out than get a one that was too low.. and get pulled over all the time
so personally for 7x13 i'd say roughly et 10 at the back and 20 at the front
-
- Getting There!
- Posts: 59
- Joined: Thu Nov 16, 2006 8:58 am
- Location: yorkshire
- Contact:
-
- New
- Posts: 4
- Joined: Fri Nov 10, 2006 8:05 pm
- Location: Kent or NW london...
-
- Getting There!
- Posts: 59
- Joined: Thu Nov 16, 2006 8:58 am
- Location: yorkshire
- Contact:
-
- New
- Posts: 4
- Joined: Fri Nov 10, 2006 8:05 pm
- Location: Kent or NW london...
-
- Getting There!
- Posts: 59
- Joined: Thu Nov 16, 2006 8:58 am
- Location: yorkshire
- Contact: