Page 1 of 1
9N alloys fitment?
Posted: Fri Jan 26, 2007 4:47 pm
by LowPoloCo.
hey guys, im not too sure wether i fully understand this alloy business
http://cgi.ebay.co.uk/VW-GOLF-MK4-GTI-T ... dZViewItem
they'll fit wont they, coz they're off a mk4 golf?
thanks
ell
Posted: Fri Jan 26, 2007 4:58 pm
by Redline
Mk4 Golfs have a 5x100 stud pattern, as do Mk6/7 Polos.
On that basis they should fit.
Posted: Fri Jan 26, 2007 6:20 pm
by carmadaaron
i can confirm they fit. (wheel wise)
but the tyres are too high profile (height), which means youll need new smaller tyres.
Posted: Sat Jan 27, 2007 12:03 am
by jokjok11
Hey, Yes they will fit, If you have these tyres, they will JUST fit around your wheel arches... I know this because I have the same 16inch alloys and same spec tyres...
The front wheels will go full lock both directions no problem, but literally leaving 10mm (if that) between tyres. The rear wheels are can be a problem, the plastic wheel arch can be modified yourself by makin the wheel arch bigger using allen key to adjust.... I found that on my Left rear wheels have plenty of space.. but the right hand, it was really tight and was scrapin when on roundabouts :S... but i think i fixed that prob now
But yeh, they will fit, but as carmadaaron, recommend gettin lower profiles...