Page 1 of 1
tech specs?
Posted: Sun Feb 09, 2003 9:30 pm
by polo2k
i dont usually post in here but im wandering if anyone knows how much a stock g40 charger (or a modded one) puts out
also if possible the belt speed, or the size of the stock pully`s (crank and charger)
and one last thing which is a little trickier;what ol pressure does the charger requre and how much (litres/min)?
sorry for all the questons
Posted: Mon Feb 17, 2003 10:16 pm
by JellyB
I know that the stock charger pulley is 75mm in diameter, I think the max charger rotate speed is of the order of 10-15k (based on the 16k rpm bearing). I will be looking at the belts on my car soon so I will measure the lower pulley, I will dig out some definite info and post them here.
What are you planning anyway? (Super curious)
Posted: Mon Feb 17, 2003 10:18 pm
by polo2k
JellyB wrote:
What are you planning anyway? (Super curious)
nittin`
Posted: Mon Feb 17, 2003 10:24 pm
by JellyB
knitting?
Posted: Mon Feb 17, 2003 10:29 pm
by polo2k
when i wrote that my "u " button went incognitto i ment to say nUttin
Posted: Fri Mar 21, 2003 7:46 pm
by james
I seem to remember the charger would create about 0.6-0.7bar in a standard car. Can't help with the actual displacement/time measurement or oil either I'm afraid. Modded charger with 67mm pulley would raise output to around 1bar, again on an otherwise standard car