UK-POLOS.NET - THE VW Polo Forum

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... &rd=1&rd=1

Just saw these on eBay. Seem to be going fairly cheap!

Didnt actually realise they were a genuine vw product! lol

Are they fairly easy to fit? Sounds an odd question but on some cars they are a lot easier to fit pedals than others.

Cheers

Brake and clutch are a straight swap, the accelerator pedal is a bit bigger and requires some glueing. As it says in the listing it's a 10min job

Hope that helps,

Haris

h4r1s wrote:Brake and clutch are a straight swap, the accelerator pedal is a bit bigger and requires some glueing. As it says in the listing it's a 10min job

Hope that helps,

Haris

Yeah thats cool. I saw in the listing its a 10 minute job. Seems fairly straightforward and easy to do. The listing says ON SOME LUPO'S, AUDI TT's AND MARK 4 GOLFS THE ACCELLERATER PEDAL MAY NEED TO BE BONDED OR SUPER-GLUED ON

It doesnt say anything about it needing glue on a Polo. Excuse my ignorance here. I would guess like you say it does due to it being bigger.

Cheers for your help!!

I am def thinking of getting some. They look quite smart. I guess a few ppl on here have them?

Yes definitely love mine, make the inside of the car look 10x better

nice
thats told me to buy them now!! lol

i even have them in my ibiza, although i had Golf R32 ones in my polo. they are a bit more expensive tho!

DanDiesel wrote:i even have them in my ibiza, although i had Golf R32 ones in my polo. they are a bit more expensive tho!

The R32 ones are quite swish

Just out of interest how do they fit on? Im sure I read somewhere that they go over your existing pedals??

You have to take your pedals off first, the accelerator just clips off, the other 2 will be a bit more difficult. Once you get them off, get the TT pedals in some nice hot water so the rubber stretches a bit, then try and put them on using the outlines as guidelines. For the accelerator use either bonding glue or blue-tak.

MaxZ wrote:You have to take your pedals off first, the accelerator just clips off, the other 2 will be a bit more difficult. Once you get them off, get the TT pedals in some nice hot water so the rubber stretches a bit, then try and put them on using the outlines as guidelines. For the accelerator use either bonding glue or blue-tak.

cool. blue-tak sounds a better idea. if I sell it then I would wanna put it back to standard fairly easily!!

cheers. wanna get them now!!

yeah a great mod to do, mine were about £20 from ebay. had to glue the accelerator one on, i figure why would anyone want to go back to black rubber ones!