Wheel brace and locking nuts

GT_Raven · Post by **GT_Raven** » Tue Aug 07, 2007 8:38 pm

could someone post a picture as to what the locking nut to the montreal 2s look like please as mine doesnt fit and need to go see vw

also does the wheel brace with the 9n have a little black rubber bit in the end ??

panda · Post by **panda** » Tue Aug 07, 2007 9:40 pm

pull the little black rubber bit out, it'll be your screwdriver.

GT_Raven · Post by **GT_Raven** » Tue Aug 07, 2007 10:10 pm

ah right so it should have one then cuz mines missing

RUM4MO · Post by **RUM4MO** » Wed Aug 08, 2007 11:14 pm

panda wrote:pull the little black rubber bit out, it'll be your screwdriver.

I could be talking out of the rear of my trousers, but is that bit not the compliant bit that you use to send your wheel covers into outer space - I have not checked the Polo's tool kit for a while - but I vaguely remember something like that being there - it has no use when you have alloys (I think). The reversable screwdriver usually slots into its own stage space in the tool storage thing.