UK-POLOS.NET - THE VW Polo Forum

Yea, as the title says, i cleaned it! on my AEX 1.4L engine, gave it a darn good clean in and out with brake and parts cleaner, put it on, initualy it splutterd a bit when it started but i guess thats because a fair amount of parts cleaner went into the manifold. But now the idle is much higher, its arround 1500RPM, then it would drop breifly, then back up. I went for a short drive, then came back and the revs were lower and settled but still more than it used to be. then after a quick rev it went back to floating arround 1500 rpm.


now i have had this happen before when i pulled that multi plug off the throttle boddy by accident when it was running, it stalled then when i restarted the revs were high but it settled it no time. Is this normal? will it settle? For all i know its supposed to be higer lol! before it was very low, now it seems to high, but it settles a little if i leave it idling.

Leave the battery off for 45 or so mins. It will reset the ECU, so the throttle body will learn its reference position again. Happened to my mates when we did it was quite scary to begin with!!

Ahh rite, thanks! I didnt think the ECU on the AEX leanrt much. Im regularly resetting the ECU on my Gt-four for this sort of thing but i didnt think the vw was quite that cleaver

I have heard that disconnecting the battery doesn't always work, and may need a vag-com or something connected to have the "basic settings" performed. The reason I say this, I did mine last week(cleaned the TB) and she revved away like mad. Luckily I have a vag-com cable and a licenced copy of vag-com so I was able to clear all errors. Shame you don't live near Romford, otherwise I'd say pop your car round, but you live in Cornwall

Its very dependant on the car - some itll fix some it wont. Every car is different unfortunately

Hm, i pulled the battery and it didnt work... but today i pulled the vacuume hose off the TB that connects to the carbon canister ( i think) It reved up and sucked in, so i reconnected it.... and it was fine since that! Odd, hopfully it will stay that way lol.

yer mine played up after cleaning the TB
so i reset the ECU
you dont need to leve the battery unpluged for 45 mins you just unplug it an touch the 2 leds together .

The_phat_controlleruk wrote:Shame you don't live near Romford, otherwise I'd say pop your car round

Reckon it'll work on mine? Revs drop n come back up whenever or when press clutch whilst coming to a stop and sometimes stalls. Where bouts in Romford you from? I'm always roun dagenham, ilford, romford etc but never seen you around. We should get a meet together for the East or meet at SEC or Brands Hatch sometime. Theres a few nice Polos locally

dunces6 wrote:yer mine played up after cleaning the TB
so i reset the ECU
you dont need to leve the battery unpluged for 45 mins you just unplug it an touch the 2 leds together .

what two leds?

I think he means short out the terminals with the battery connected. yea that would work but i dont think its particularly good for the electronics lol

lol unless you want to permanentlydamage it then do not by any means do that!!

NOZ what the hell yuo doign round dagenham. i know i aint seen you about lol. I reside in rainham. Ive met phat controller at a sort of firs attempt at a SE meet at thurrock services a while ago. well over a year i think. my first ever meet so i was a bit uneasy. i think only three of us turned up. me phat controller and ongar GTI with his 6n2.

Dont mean to say one doesnt need to be organised though. it shud happen!!!.

When my cars back on the road that is... lol.

LeMeph wrote:my first ever meet so i was a bit uneasy. i think only three of us turned up. me phat controller and ongar GTI with his 6n2.

Thats one lonely meet guys!!!

Sometimes down there but im closer to city E1 ends. Fed up of not going any shows/events cos they all seem 2B up north. i only manage to go Brands Hatch (Bluewater) Prept meets and the SEC cruise roun Gallions Reach/Lakeside. So want to gather a few Polo's roun Beckton. Only person I know ere is power_plant with a stripped-out 1.6. His tried to arrange it before at Beckton with no success. Seen 1 or 2 nice Polo's down my ends but never spoke to em. Hopefully thats not 2 far for you guys?

So if wana get the SE Polo's 2geva for a meet down Beckton let me know and i'll put a post up soon. Still need to get me new rims on before show it off.

LeMeph, you in friggin Rainham??, I could spit further than that (sorry for topic stealing) Hope you get the car sorted soon.

Still need to get me new rims on before show it off.

You ain't seen my wheels, curbed to buggary so I wouldn't worry about yours, still trying to source a set of stealies.

Although I spend some near that end of Essex i'm still 16miles away but sure you guys wouldn't mind meating midway sometime for a meet.

I'v got a set of Zenders from one of the others on this forum and his sold me a set with the wrong CB so need an engineer to drill em bigger and I don't wanna pay for the hassle but his taking ages to get back to me.