any help greatly appreciated
debadging please !!! :lol:
debadging please !!! :lol:
hey guys was wondering if someone could post a diy guide of debadging the back sings like polo 1.4cl and the black rubbers on the doors all the links in the forum seam to be broken ?????
any help greatly appreciated
any help greatly appreciated
step 1:
get a hair dryer
step2:
hold it on the hottest setting, about 2 inches away from the edge.
step3:
peel off really slowwly, about an inch or two.
step4:
repeat step 2 but an inch to the side of where you just peeled off.
step 5:
get a bit of T-cut to rubb over, and match the paint colour the same, as it may be a little different colour from fading. and removes exess glue
it isnt a hard job matey.
P.S a wasnt bien cockey if it sounds lyk it.
alsooooo. im taking the black trimms of mine this weekend. soo ill tek sum pictures then. cause if only debaged my boot at the moment. but its the same process
thers no holes or owt that need filling. easy
get a hair dryer
step2:
hold it on the hottest setting, about 2 inches away from the edge.
step3:
peel off really slowwly, about an inch or two.
step4:
repeat step 2 but an inch to the side of where you just peeled off.
step 5:
get a bit of T-cut to rubb over, and match the paint colour the same, as it may be a little different colour from fading. and removes exess glue
it isnt a hard job matey.
P.S a wasnt bien cockey if it sounds lyk it.
alsooooo. im taking the black trimms of mine this weekend. soo ill tek sum pictures then. cause if only debaged my boot at the moment. but its the same process
thers no holes or owt that need filling. easy