UK-POLOS.NET - THE VW Polo Forum

Any1 know who sells the inductions pipes that come from the throttle body down to the big gap at the left hand side of the engine? Don't want a little cone sittin on top of my engine looks crap and doesn't get enough cold air! P.s 1.4 8v

I looked into it a while back and couldn't find anything, but you could look at customising a Bonrath PowerRohr from a Golf to the original filter housing

I made my own using silicon hosing and metal tubing.

Thats probably the best idea from Josh.

All you need to do is measure the diameters, lengths and angles needed, then work out where the filter will go and stick a suitable size cone on the end.

when u buy an induction kit u generally get some sort of hosin with it, wot i did was use the hose for ya RAM air induction, next to the radiator there is a plastic cover, cut a hole in that the same size as the hose and feed it through upto ya front grill u should get maximun suction then!!!!

cheers guys, nice quick reply fo my first post!