UK-POLOS.NET - THE VW Polo Forum

polo12345 · Post by **polo12345** » Sun Apr 06, 2008 5:39 pm

Have looked around for one but cant seem to find one theres not even one on ebay??? Any1 selling one? Or no where to buy one from? Thanks

jason11 · Post by **jason11** » Sun Apr 06, 2008 6:58 pm

venom motorsport?

Tim_GTi · Post by **Tim_GTi** » Sun Apr 06, 2008 7:41 pm

kam racing also

loud · Post by **loud** » Mon Apr 07, 2008 9:18 am

rimstyle.com

polo12345 · Post by **polo12345** » Tue Apr 08, 2008 6:01 pm

Cheers! One more question does it use up alot more petrol than usual?

Tim_GTi · Post by **Tim_GTi** » Tue Apr 08, 2008 6:57 pm

No if anything its ment to save.

However once installed your driving style may change which will result in you using up more fuel.

loud · Post by **loud** » Tue Apr 08, 2008 11:24 pm

i'd say it makes 0 difference to fuel economy by design, mine plummeted though as I revved more than I used to so I could get the full noise out of it

polo12345 · Post by **polo12345** » Wed Apr 09, 2008 8:26 pm

Just bought it from venom motorsport it says in Product notes - Needs an extension pipe between the CDA & inlet manifold. I take it thats the silicon bend? You know anywhere i could get one of these badboys? Cheeeers!

h4r1s · Post by **h4r1s** » Wed Apr 09, 2008 8:52 pm

kam racing once again, ebay? dont know where else would do them

polo12345 · Post by **polo12345** » Wed Apr 09, 2008 10:03 pm

Any1 got a link? Just worried about buying the wrong thing

Tim_GTi · Post by **Tim_GTi** » Thu Apr 10, 2008 3:06 am

http://www.kam-racing.com/product_info. ... cts_id/987

polo12345 · Post by **polo12345** » Thu Apr 10, 2008 6:29 pm

Damn ive already bought it off venom motosport, Have you got the link for just a 90 degree silicon bend i searched on ebay but its from australia? Cheeeeers

Tim_GTi · Post by **Tim_GTi** » Thu Apr 10, 2008 9:14 pm

I'm not sure where to find them invidually sorry, I got mine with the BMC. Maybe Halfords? (I though eBay also, but just had a quick search and couldnt find anything)

Redline · Post by **Redline** » Thu Apr 10, 2008 9:42 pm

Any use?

http://www.larkspeed.com/index.pl?c=BMC ... s=category

Tim_GTi · Post by **Tim_GTi** » Fri Apr 11, 2008 12:53 am

Yeh that's your badger right there

http://www.larkspeed.com/index.pl?a=i&c ... l_Diameter

Nice one redline