MK2 ignition cable

GroovyCarrot · Post by **GroovyCarrot** » Tue Mar 30, 2004 10:37 pm

Does anyone know where I can access the 12v ignition cable (grey / blue stripe) in a mk2 polo without removing the dashboard?

I fitted a new dashboard last week which had the radio wiring running straight to the battery without being switched with the ignition, which seems to be taking 0.5 amps even when it's switched off - woke up to a flat battery this morning because of it

and I seriously don't want to have to remove the dashboard again to rewire it, it's such a hassle..

It does strike me as rather odd that the radio should draw so much even when it's switched off.. but I guess that's another matter entirely.

optima21 · Post by **optima21** » Wed Mar 31, 2004 9:18 am

yeah you can get to it in the main loom where it goes through the bulkhead behind the glovebox, the only touble is finding the right wire though

GroovyCarrot · Post by **GroovyCarrot** » Wed Mar 31, 2004 8:15 pm

Ah, excellent.. I'll take a look tomorrow when I have some light to do it by

Cheers for that.

GroovyCarrot · Post by **GroovyCarrot** » Thu Apr 01, 2004 11:19 pm

Well, I spent half an hour hanging upside down in a position I never thought possible poking the wiring loom behind the glovebox with a multimeter, then actually thought about what I was doing and realised that all of the switches on the dashboard are wired to the ignition and very nice and easy to access.. so my radio is now wired into my rear screen heater