alloy help ?????

Chat about your MKV (6N2) Polo
Post Reply
Tom9991-Polo
New
Posts: 20
Joined: Tue Jun 02, 2009 10:42 am

alloy help ?????

Post by Tom9991-Polo »

will 16" oz racing superturismos (PCD is 4x100,Offset is ET16) with these tyres 195 / 45 / R16 fit my 6n2 ?????
User avatar
6N2 GTI 00
Bling Bling Diamond Member
Posts: 4143
Joined: Mon Dec 08, 2008 9:20 am
Location: North Wales, Denbighshire - Drives 255bhp EP3 Type R!

Re: alloy help ?????

Post by 6N2 GTI 00 »

The alloys will be fine mate but in terms of tyres you want 195/40/16's.

I have just fitted 16" BBS RXII's to my Polo and the 195/40's are perfect for my car.
User avatar
Tim_GTi
Post Whore
Posts: 12289
Joined: Mon Jun 25, 2007 6:31 pm
Location: Newport, South Wales
Contact:

Re: alloy help ?????

Post by Tim_GTi »

that's a pretty low offset for OZ wheels, you'll definitely have problems with that and those tyres, as previously said you'll need at least 195/40s if not 165/40 (if you like the stretched scene). what width are the wheels?
Tom9991-Polo
New
Posts: 20
Joined: Tue Jun 02, 2009 10:42 am

Re: alloy help ?????

Post by Tom9991-Polo »

Tim_GTi wrote:that's a pretty low offset for OZ wheels, you'll definitely have problems with that and those tyres, as previously said you'll need at least 195/40s if not 165/40 (if you like the stretched scene). what width are the wheels?
Doesnt matter now found out that the PCD for the alloys are 108 not the 100 as advertised. So now im stuck with oz alloys that dont fit :x . Think i might just get some 15 inch bbs alloys.
Post Reply