Page 1 of 2

accelerator needs more pressure

Posted: Thu Dec 17, 2009 3:07 pm
by kipper
probably not the best way to describe it but have noticed probably started about 5 months or more ago when u push the accelerator down i need to push it down more and gett he revs up higher to make sure the car moves and doesnt stall. car still works etc just wondering if n e one might know a possibly cause or the reason?

thanks

Re: accelerator needs more pressure

Posted: Thu Dec 17, 2009 3:39 pm
by nigelelliott394
I had an old peugeot 206 where the throttle cable snapped... the car just didn't accelerate at all and the pedal lost all 'pressure'. Had to have a new throttle cable fitted before it worked again. I'm not sure how 6n2's are... but that MAY be the problem. I'm sure someone will be along soon to confirm :)

Re: accelerator needs more pressure

Posted: Thu Dec 17, 2009 5:16 pm
by kipper
i can still move and pick up speed it just isnt as sensitive as it use to be.

my mum has a 6n and the accelerator is very nice and responsive.

Re: accelerator needs more pressure

Posted: Fri Dec 18, 2009 8:32 am
by alexperkins
just adjust the throttle cable to take up any slack.

Re: accelerator needs more pressure

Posted: Fri Dec 18, 2009 7:00 pm
by kipper
i suppose that could make sense really. where do u adjust it tho?

Re: accelerator needs more pressure

Posted: Sat Dec 19, 2009 12:18 am
by alexperkins
Where the cable goes into the mount on the throttle body, there is a ribbed plastic tube with a clip, you just take up the slack in the cable, and move the clip to the appropriate position.

Re: accelerator needs more pressure

Posted: Sat Dec 19, 2009 12:52 am
by kipper
excellent. i'll have a look into that tomorrow.
thanks

Re: accelerator needs more pressure

Posted: Sat Dec 19, 2009 2:33 pm
by kipper
i dont believe there is a cable. i had a look in the engine and couldnt see one and when i read the haynes manual i read that there isnt a cable as its done electriconically.

is there a way to adjust it manually or would it be a garage jobby?

Image

Re: accelerator needs more pressure

Posted: Sat Dec 19, 2009 3:50 pm
by Brad.
Yeah, only the GTI's have the throttle Cable. All the other models are Electronic i think...

Re: accelerator needs more pressure

Posted: Sat Dec 19, 2009 6:14 pm
by alexperkins
No lol - the GTIs are electronic - all other models par the 1.4 16V 100bhp model have throttle cables

Check the back of the pedal to see if there is a cable attached to it.

What engine is yours kip?

Re: accelerator needs more pressure

Posted: Sun Dec 20, 2009 12:00 am
by kipper
not sure but on the log book it says engine no: AUC(then about 6 numbers)

is that it or would it be somewhere else?

Re: accelerator needs more pressure

Posted: Sun Dec 20, 2009 8:42 am
by alexperkins
1.0 8V then

Should be a cable throttle. I think the cable is located underneath the back of the throttle body from memory - just have a quick nose under the pedals to see if there is a cable attached to the back of the accelerator cable

Re: accelerator needs more pressure

Posted: Sun Dec 20, 2009 2:12 pm
by Brad.
Ah my bad, sorry Alex.
Read it on Clubpolo the other day. Oppsie

Re: accelerator needs more pressure

Posted: Sun Dec 20, 2009 5:05 pm
by alexperkins
lol thats clubpolo for you :P

Re: accelerator needs more pressure

Posted: Sun Dec 20, 2009 6:43 pm
by Brad.
hahaha, i was reading on here that you've got a grill spare, wouldn't happen to be a GTi one would it?