Page 1 of 1
Wiring a 4ch amp
Posted: Mon Aug 16, 2010 4:29 pm
by lowfoon
What is the best way to wire a 4ch amp to all four speakers?
The best way I can think of is locating and cutting the wires at the back of the stereo...
Re: Wiring a 4ch amp
Posted: Mon Aug 16, 2010 8:23 pm
by alexperkins
Depends if you are going to change the wiring that goes to the speakers. Quickest option is to fly the new wires from the amp to where the back of the radio is and put an iso block plug on the wires, so the existing speaker plug will just connect no cutting required!
Re: Wiring a 4ch amp
Posted: Mon Aug 16, 2010 10:45 pm
by lowfoon
Cool, that was my plan - Where can I get the cheapest ISO block.. Can't find anywhere on the net.. Maybe I'm searching the wrong thing
Re: Wiring a 4ch amp
Posted: Tue Aug 17, 2010 10:11 am
by Adam-
I thought having more connectors in the system would decrease quality. I ran the audio from the amp back up to the headunit, and cut the ISO block off, and soldered onto the original wiring!
It's just as neat, and I dont plan on selling the car on anyway!