Page 1 of 1
Boost gauge - which wire to use for power?
Posted: Thu Mar 10, 2011 1:10 pm
by Gillen
Which wire do you use to connect the wire coming from the boost gauge to? I've seen some people use the power wire going to the headlight switch as this allows the gauge lighting to adjust when using the dimmer on the light switch unit...but I don't know which wire!
Thanks
Re: Boost gauge - which wire to use for power?
Posted: Fri Mar 11, 2011 9:48 am
by Harney
I just wired mine into the cigarete lighter socket so that the light comes on with the ignition but thats because mine are the smoked gauges. have a look at thios thread, mite be of some help
http://www.vwwatercooled.org.au/f127/gu ... 35780.html
Re: Boost gauge - which wire to use for power?
Posted: Sat Mar 12, 2011 1:06 am
by g__humm
Wired mine to the light switch so when u turn ur lights on it goes on. Use a multi meter to get the wire needed.
Re: Boost gauge - which wire to use for power?
Posted: Sun Mar 13, 2011 4:14 pm
by Gillen
If using the live for the headlight switch I'm assuming the power will only come on when the switch is turned...not a constant so i'll get a flat battery?
Re: Boost gauge - which wire to use for power?
Posted: Sun Mar 13, 2011 4:43 pm
by Gillen
To answer that...yes the gauge is constantly illuminated if using the live for the headlight switch.
Not sure which one to use!