Page 1 of 1
How much psi should......
Posted: Wed Jun 20, 2012 3:45 am
by morells
Hey everyone I was just wondering if you could answer my two questions
1) how much psi should a standard gti be producing
2) how much psi should a stage 1 gti be producing ( I know every map is different just wanted a rough idea)
Thanks
Re: How much psi should......
Posted: Wed Jun 20, 2012 6:11 pm
by Mr Blobby
morells wrote:Hey everyone I was just wondering if you could answer my two questions
1) how much psi should a standard gti be producing
2) how much psi should a stage 1 gti be producing ( I know every map is different just wanted a rough idea)
Thanks
Standard PSI at 7 psi (0.5 bar) and when i got my stage one done it peaked at 19 psi and ran normally at about 11 psi
Re: How much psi should......
Posted: Thu Jun 21, 2012 5:19 pm
by Harney
Mine standard peaked around 11 and held 7, now it peaks about 21 and holds 15-16
Re: How much psi should......
Posted: Mon Jun 25, 2012 9:08 am
by PogoCT
standard peak at 1.1bar (16psi) and then settle at 1bar (14psi) (car driven off the shop floor albeit a pre owned) did the boost gauge prior to software and mods??
after software peaked at 1.6bar (23psi) and settles at 1.4 (20psi)
seriosuly confused and a tad worried since it's substantionaly higher as the tuner also mentioned this.