9n3 GTi splitting
Forum rules
Please Use The New FOR SALE CATEGORIES when listing an item for sale!
Please Use The New FOR SALE CATEGORIES when listing an item for sale!
-
- Bronze Member
- Posts: 124
- Joined: Sat Oct 15, 2011 11:08 pm
9n3 GTi splitting
Splitting some bits off my car before selling/trading my car in for something more economical due to work commitments .
I will get pictures and more info up asap just seeing what interest there is before going on ebay.
16" monza alloys in need of a refurb no major kerbing just little bits on the odd wheel *** SOLD ***
Milltek non res cat back with reducer and clamps etc - *** SOLD ***
Forge 007p in silver (serviced before sale) - *** SOLD ***
Standard gti springs with rubber mounts - £50
standard slatted grills £10
Forge red intercooler to throttle body hose - *** SOLD ***
standard turbo intake pipe - £20
Collection only or may possibly meet for cost of fuel within 20 miles of BL5
Any questions PM me and I'll get back to you
I will get pictures and more info up asap just seeing what interest there is before going on ebay.
16" monza alloys in need of a refurb no major kerbing just little bits on the odd wheel *** SOLD ***
Milltek non res cat back with reducer and clamps etc - *** SOLD ***
Forge 007p in silver (serviced before sale) - *** SOLD ***
Standard gti springs with rubber mounts - £50
standard slatted grills £10
Forge red intercooler to throttle body hose - *** SOLD ***
standard turbo intake pipe - £20
Collection only or may possibly meet for cost of fuel within 20 miles of BL5
Any questions PM me and I'll get back to you
Last edited by lee gti 88 on Thu Nov 07, 2013 7:24 pm, edited 7 times in total.
-
- Bronze Member
- Posts: 231
- Joined: Sun Apr 14, 2013 3:21 pm
- Location: Stockton-on-Tees/Preston
Re: Re: 9n3 GTi splitting
Interested in the exhaust and dvlee gti 88 wrote:Splitting some bits off my car before selling/trading my car in for something more economical due to work commitments .
I will get pictures and more info up asap just seeing what interest there is before going on ebay.
16" monza alloys in need of a refurb no major kerbing just little bits on the odd wheel (did start sanding down but never finished) one has a tyre that has a bit of tread and another tyre with good tread but was drived on a flat to the garage about2 mins so unsure if its ok to be used? - £250
Milltek non res cat back with reducer and clamps etc - £245
Forge 007p in silver (serviced before sale) - £60
Standard gti springs with rubber mounts - £50
standard slatted grills £10
Forge red intercooler to throttle body hose - £35
standard turbo intake pipe - £20
Collection only or may possibly meet for cost of fuel within 25 miles of BL5
Any questions PM me and I'll get back to you
Only up the road in Preston too. Await further info and pics
Sent from my GT-I9100P using Tapatalk 2
Re: 9n3 GTi splitting
Intrested in your exhsust. If the above posted decides otherwise
-
- Bronze Member
- Posts: 124
- Joined: Sat Oct 15, 2011 11:08 pm
Re: 9n3 GTi splitting
Hi, heres the pictures as promised. Sorry about the poor quality I took them off my phone after removal.
Could all do with a good clean, any questions PM me
Exhaust just had a quick wipe could do with a polish,
Springs is mainly dirt, slight rust at the top where they situate on the strut nothing major
DV has the odd mark where the engine cover has rubbed on it,
the random paint on the wheels is random paint from boredome and prior to me attempting to clean out the scuffs with filler primer, nothing deep wouldnt take much work.
About all I can think of
Could all do with a good clean, any questions PM me
Exhaust just had a quick wipe could do with a polish,
Springs is mainly dirt, slight rust at the top where they situate on the strut nothing major
DV has the odd mark where the engine cover has rubbed on it,
the random paint on the wheels is random paint from boredome and prior to me attempting to clean out the scuffs with filler primer, nothing deep wouldnt take much work.
About all I can think of
-
- Bronze Member
- Posts: 231
- Joined: Sun Apr 14, 2013 3:21 pm
- Location: Stockton-on-Tees/Preston
Re: 9n3 GTi splitting
Got any close up pics of the dv? The marks etc
Sent from my GT-I9100P using Tapatalk 2
Sent from my GT-I9100P using Tapatalk 2
Re: 9n3 GTi splitting
Do you have an uprated tip on the car as sellinf off the standard ?
If so whip it off and let me buy it haha
If so whip it off and let me buy it haha
Re: 9n3 GTi splitting
what colour spring does the dump valve have mate ? only a few miles away from you
-
- New
- Posts: 7
- Joined: Sun Sep 22, 2013 11:13 pm
Re: 9n3 GTi splitting
would you not deliver the grills pal?
-
- Bronze Member
- Posts: 124
- Joined: Sat Oct 15, 2011 11:08 pm
Re: 9n3 GTi splitting
Its the standard spring good for standard or stage 1 map and I will try and get some pictures up tomorrow
Re: 9n3 GTi splitting
whats your best price on dv and would you be willing to meet half way at say bamber bridge ?
-
- Bronze Member
- Posts: 124
- Joined: Sat Oct 15, 2011 11:08 pm
Re: 9n3 GTi splitting
Got someone potentially coming to collect at weekend mate, I will let you know if it doesnt sellpolo9n wrote:whats your best price on dv and would you be willing to meet half way at say bamber bridge ?
-
- Bronze Member
- Posts: 124
- Joined: Sat Oct 15, 2011 11:08 pm
Re: 9n3 GTi splitting
Sorry guys only just noticed these
I do mate but cant be bothered taking it off if i get a change of heart and take it off its yoursdave9n3 wrote:Do you have an uprated tip on the car as sellinf off the standard ?
If so whip it off and let me buy it haha
Ive nothing to package anything in mate or I would, I will have a hunt round for a box at weekendeatsleepsnowboard wrote:would you not deliver the grills pal?
Re: 9n3 GTi splitting
I just noticed your pm im a new member so post hsve to be verified etc
Ive just purchased coilovers fitting tomorrow.im intrested in the miltek ive wrote your number down ik know where im upto by tuesday so il be in touch
A deal on the tip and exhaust (wink wink)
Dave
Ive just purchased coilovers fitting tomorrow.im intrested in the miltek ive wrote your number down ik know where im upto by tuesday so il be in touch
A deal on the tip and exhaust (wink wink)
Dave
-
- Bronze Member
- Posts: 124
- Joined: Sat Oct 15, 2011 11:08 pm
Re: 9n3 GTi splitting
Hi Dave,
Got a guy coming to look at the exhaust tomorrow and as it stands the TIP is still on the car
Got a guy coming to look at the exhaust tomorrow and as it stands the TIP is still on the car
Re: 9n3 GTi splitting
No worries mate. Ik keep my eye on the thread