Page 1 of 1
Can the heated seats be programmed to remember setting?
Posted: Thu Jan 08, 2015 12:34 pm
by TheFrog
I use heated seats all the time for about 2/3 of the year, but since VW moved from the wheel-like control a few years ago to a two-setting on/off switch, I have to switch them on EVERY time I start the engine.
Is there any way they can be programmed using VAGCOM or whatever to remember the previous setting and come on automatically when I start the engine?
The good ol' days:
Re: Can the heated seats be programmed to remember setting?
Posted: Thu Jan 08, 2015 1:37 pm
by ciclo
I'm afraid not.
The electrical supply on the heated seats is from the fuse SB37, not through the BCM.
This is the only communication signal: T73a/36 Signal off seat heating
Re: Can the heated seats be programmed to remember setting?
Posted: Thu Jan 08, 2015 4:13 pm
by TheFrog
ciclo wrote:I'm afraid not.
The electrical supply on the heated seats is from the fuse SB37, not through the BCM.
This is the only communication signal: T73a/36 Signal off seat heating
Pity, but at least I know now. Thanks
Re: Can the heated seats be programmed to remember setting?
Posted: Sat Jan 31, 2015 5:00 pm
by rsmagee
Ignore, I need to work out the codeing. It can be done on a mk7 golf and therfore it should be possible on the 6C
Re: Can the heated seats be programmed to remember setting?
Posted: Sat Jan 31, 2015 5:23 pm
by TheFrog
rsmagee wrote:Ignore, I need to work out the codeing. It can be done on a mk7 golf and therfore it should be possible on the 6C
Ooh, potential good news...
Re: Can the heated seats be programmed to remember setting?
Posted: Tue Feb 03, 2015 9:52 am
by ciclo
Anything new on this matter?
Re: Can the heated seats be programmed to remember setting?
Posted: Tue Feb 03, 2015 10:12 am
by rsmagee
I have sent the adaption maps to Ross Tech. The mk7 golf can do it, so the polo should too. Will try messing with the coding when I have some spare time.