UK-POLOS.NET - THE VW Polo Forum

Hi! Is there a simple way to add another beam to pin T5h/1?

I would like to do additional lighting as in this guide: https://drive.google.com/file/d/0B2nv91 ... FTMFk/view


How can I add there a new wire beam? Without soldering?


http://i60.tinypic.com/1zqdbpe.jpg


Any suggestions?

i would strongly recommend to solder new wires

For me (IMHO) the best way is crimping the two wires in the same terminal.

Examples:





----- click on pics

-----

In the following links you have additional information:

http://www.a4-freunde.com/showwiki.php? ... zu+gehoert (3)

http://www.uk-polos.net/view ... 90#p482495

Search with your browser: SN-48B (aliexpress.com)

I agree with ciclo that a double crimp is always the nicest solution. But fot the T5h/1, the wire is fairly tight in the bend there.

Cutting of the original terminal off shortens it by about 1 cm and then it becomes even tighter there. I'm not sure that is good on that spot, but it is good to consider a double crimp yes.

Ok, thanks! So I should to buy 000979129 terminal?