Complete Door Removal / Replacement

[RifleMan]

hi folks,

i am a newbie here, tasked with sorting out my wife's VW Polo and hopefully some of you may be able to me.

i need to replace the complete rear passenger door on my 2013 VW Polo (victim of a hit and run job) - does anyone know how I get this off please?

if anyone has any experience in changing the door or can point me in the right direction that would be great thank you and i can make the long-haired General happy about driving her cherished VW Polo again.

thank you in advance

[peter_dk25]

http://workshop-manuals.com/volkswagen/ ... /removing/

[RifleMan]

Peter,

thank you so much, i'm not very good at this stuff at all but i'll try work out the diagram and give ti a go - this is the best info i have seen so thanks again.

i'll let you know how i get on

[peter_dk25]

[RifleMan]

hi Peter,

would you (or anyone), know which bolt-head i would use to undo bolt 7 and which spline-head do i use to undo bolt 5?

thank you.

[alexperkins]

7 is a torx socket

5 is a mutli spline bit - probably M8 or M10.