and did any polo come with rear disc's that could easily be swapped over to a Mk2?
Cheers
Craig
Mk4 engine codes and power figures
Mk4 engine codes and power figures
has anyone got a list of different engines, codes and power output for all the petrol engines in the Mk4??
and did any polo come with rear disc's that could easily be swapped over to a Mk2?
Cheers
Craig
and did any polo come with rear disc's that could easily be swapped over to a Mk2?
Cheers
Craig
-
david burton
- Bling Bling Diamond Member
- Posts: 3082
- Joined: Wed Aug 06, 2003 2:31 pm
- Location: Reading
- Contact:
none came with rear discs, except possibly the mkiv gti.
you'll never find one of them, though!
the 16v had bigger discs up front. All of em had drums at the rear.
Hmm, there's a range of engines, 1.0, 1.3, 1.4, 1.6, and a range of powers that swapped halfway through the runs of things.
1.6 is 75bhp, 1.4 16v is 100bhp
the rest are 60bhp and less. anyone? anyone? anyone? bueller?
you'll never find one of them, though!
the 16v had bigger discs up front. All of em had drums at the rear.
Hmm, there's a range of engines, 1.0, 1.3, 1.4, 1.6, and a range of powers that swapped halfway through the runs of things.
1.6 is 75bhp, 1.4 16v is 100bhp
the rest are 60bhp and less. anyone? anyone? anyone? bueller?
-
Tahrey1043
- Bling Bling Diamond Member
- Posts: 5184
- Joined: Thu Sep 18, 2003 1:15 am
- Location: Birmingham! Enjoys: The pseudo-G-Smiles provided by a 1.6 Megane Sport valver...
- Contact:
well i dunno bout the rest of them, but.....
early 1.0 and 1.3 engines shared with mk3 (and mk2...) so,
early 1.0 --- 1043cc --- 45hp @ 5200 and 55lbft @ 2800 (consider a 6n with this engine and an 8P box. then get out and walk, thereby overtaking
)
early 1.3 --- 1272cc --- 55hp @ 5000 and 69lbft @ 3000-3400rpm
later 1.0 dropped in size but increased in power (MPi??)
something like
newer 1.0 --- 998cc --- 50hp @ 5400? and 60?lbft @ 3200?rpm
dunno bout the rest
I did see a bleedin' online spreadsheet somewhere basically covering all the normally-aspirated mk3 and mk4 engines somewhere... cant for the life of me say where though! (which is where the skeleton of the new 1.0 figures come from anyway)
early 1.0 and 1.3 engines shared with mk3 (and mk2...) so,
early 1.0 --- 1043cc --- 45hp @ 5200 and 55lbft @ 2800 (consider a 6n with this engine and an 8P box. then get out and walk, thereby overtaking
)early 1.3 --- 1272cc --- 55hp @ 5000 and 69lbft @ 3000-3400rpm
later 1.0 dropped in size but increased in power (MPi??)
something like
newer 1.0 --- 998cc --- 50hp @ 5400? and 60?lbft @ 3200?rpm
dunno bout the rest
I did see a bleedin' online spreadsheet somewhere basically covering all the normally-aspirated mk3 and mk4 engines somewhere... cant for the life of me say where though! (which is where the skeleton of the new 1.0 figures come from anyway)
david burton wrote:none came with rear discs, except possibly the mkiv gti.
you'll never find one of them, though!
the 16v had bigger discs up front. All of em had drums at the rear.
Hmm, there's a range of engines, 1.0, 1.3, 1.4, 1.6, and a range of powers that swapped halfway through the runs of things.
1.6 is 75bhp, 1.4 16v is 100bhp
the rest are 60bhp and less. anyone? anyone? anyone? bueller?
if say i was to get hold of a rear ended mk4 with 1.4 16v 100bhp engine, would it be possible to swap the complete front end over to a mk2?? including dash, suspension brakes and wiring loom etc.....
ive decided that the engine in my polo is not worth bothering with, and the shells to good to scrap, want something to tear up the street in
there was something else but i forgot now
