Page 1 of 1
2001 6N2 1.4
Posted: Wed May 10, 2017 11:38 am
by AshtonRed
Just bought my first car and looking to get some advice on lowering springs and alloys.
Ideally after a 30-40mm drop with 15inch alloys.
Will 15inch ET45 6J wide alloys with a 30-40mm drop rub on the arches??
Cheers in advance
Re: 2001 6N2 1.4
Posted: Fri May 12, 2017 11:54 am
by alexperkins
They should fit ok on that ET
Re: 2001 6N2 1.4
Posted: Fri May 12, 2017 12:41 pm
by AshtonRed
alexperkins wrote:They should fit ok on that ET
Thanks
Re: 2001 6N2 1.4
Posted: Sun Aug 20, 2017 7:42 pm
by Mighty_Lad
Piggy backing on the thread here.
Could anyone tell me what Id need to get a good fit for alloys?
Pretty new here, so I dont know what ET means ect
Re: 2001 6N2 1.4
Posted: Sun Aug 20, 2017 7:46 pm
by alexperkins
You’ll need 4x100 PCD 57.1 center bore an ET between 30-45 for a decent fit
Re: 2001 6N2 1.4
Posted: Sun Aug 20, 2017 7:49 pm
by Mighty_Lad
alexperkins wrote: Sun Aug 20, 2017 7:46 pm
You’ll need 4x100 PCD 57.1 center bore an ET between 30-45 for a decent fit
Appreciate that, Thanks!
What kind of tyre size would I need for a solid fit on a 15" Alloy??
Re: 2001 6N2 1.4
Posted: Sun Aug 20, 2017 7:54 pm
by alexperkins
195/45/15 for a 6N2
Re: 2001 6N2 1.4
Posted: Sun Aug 20, 2017 8:08 pm
by Mighty_Lad
Thanks again bud
Re: 2001 6N2 1.4
Posted: Sun Aug 20, 2017 8:32 pm
by Mighty_Lad
alexperkins,
Could you recommend a place to get some alloys?
Im having bad luck with the googling here. Just getting gumtree ads.
Re: 2001 6N2 1.4
Posted: Sun Aug 20, 2017 10:03 pm
by alexperkins
Depends what you are after mate
Rimstyle or wheelbase are good starting points. They do loads of different wheels